产 品 说 明                                                                                                                    

SM/PM光纤耦合SLD模块(770-890nm中等功率光纤耦合SLD模块)

 

 

我们的主要产品是波长从650nm到1620nm具有不同谱带的单模尾纤SLD模块。

我们正在为不同的应用制造制冷(有制冷器和电热调节器)和非制冷的模块，像光纤陀螺仪、OCT、光纤组件测试、光计量学和大量的其它模块。我们也提供自由空间模块，特别是用于原子力显微术，但也包括无斑纹照明、白光干涉测量、光学试验和测量以及其它模块。

Model number：SLD-381-MP

 

特征：

- SM- or PM-fiber coupled SLDs at 770–870 nm

- Bell-shaped spectrum with negligible residual Fabry-Perot modulation depth

- maximum parasitic secondary coherence subpeaks of -20 dB (10log) for standard SLDs, and of -30 dB (spectral ripple < 0.5%/0.02 dB) for special series

 

封装：

-          fiber coupled—DIL, Butterfly

 

应用：

- fiberoptic gyros

- optical coherence tomography

- Bragg grating and other fiberoptic sensors

- optical metrology

- others

 

技术指标


Parameter

Min

Typ.

Max  

Output power ex SM fiber*, mW

(emitter @ +25 °C)

1.5


3

Forward current, mA



160

Forward voltage, V



2.7

Peak wavelength**, nm

770

830

890

Spectrum width, nm

15

20


Residual spectral modulation depth % ***


1.0

2.0

Secondary coherence subpeaks***

(10 log), dB


-25

-20

PD monitor current, μA

100



Operating temperature range****, °C

-55

-

+85

Storage temperature range, °C

-55


+85

Cooler current, A

-

-

1.2

Cooler voltage, V

-

-

3.5

* Maximum output power is guaranteed at a forward current of 160 mA or less.

** 830-nm wavelength is not guaranteed if it is not mentioned in the order. See

part numbers below.

*** Residual spectral modulation depth and secondary coherence subpeaks are

specified at an output power of 1.5 mW ex fiber.

**** Case temperature (depends on package style). The specification shown is

the case temperature for butterfly-packaged modules.

 

Additional and customized:

- wider spectrum, higher power, lower spectral ripple for meeting

customer requirements—see the next page for performance examples;

- FC/APC terminated pigtails;

- PM fiber coupled, polarized or pseudo-depolarized (light is launched into

the fiber at 45 degrees to the birefringent axes) versions.

 

The following part numbers should be used for ordering:

SLD-381-MP-(c)-(d)-PD-XXX,

where:

c – package type, DIL14, DBUT(butterfly) or SBUT (semi-butterfly),

d – type of fiber, SM (isotropic) or PM (polarization maintaining),

XXX – wavelength (in nanometers).

Example: SLD-381-MP-DIL-SM-PD-830.

 

Attention: center wavelength is guaranteed with a tolerance of maximum ±10 nm. If

a closer tolerance is required, contact our company before placing the order. If the

center wavelength is not explicitly specified in the order, an SLD centered at any

wavelength within the range of 830±20 nm may be shipped.