产 品 说 明                                                                                                                    参数表


Feature＆#118alue


Configuration:Confocal Fabry-Perot mirror
set with piezoelectric scan drive and detector
Free Spectral Range (FSR):300 MHz
2 GHz
7.5 GHz
10 GHz
Finesse:> 200 and > 100 ranges
Wavelength Ranges:450-550nm;   480-640nm;
550-680nm;   630-860nm;
860-1100nm;
1050-1250nm;   1300-1550nm;
other ranges available upon request
Input:10mm diameter aperture matching input lens
or FC (single or multimode) fiber optic input
Detectors:

  • UV-Enhanced Silicon: 450 mA/W at 900nm (peak)

  • Silicon: 450 mA/W at 900 nm (peak)

  • InGaAs: 1.1A/W at 2.3um (peak)

Piezoelectric Scan:0.8 nm/V, 1000 V max
Piezo Stack Capacitance:6.9 nF
Piezo Stack Nonlinearity:<1%
Material:Thermally stable Invar
Diameter:36mm, with 50mm diameter clamp ring for mounting
Overall Instrument Lengths:300 MHz FSR     349.0mm
2 GHz FSR     137.0mm
7.5 GHz FSR     110mm
10 GHz FSR     107.5mm


Feature＆#118alue


Piezoelectric Scan Drive

  • Range: 0-600 VDC, continuously variable

  • Shift: 0-400 VDC, continuously variable

  • Rate: 6-50 Hz, continuously variable

  • HV Output: (Range+Shift) at Rate 5.0mA
    max, 0.5V rms noise (5MHz bandwidth)

  • Monitor: (HV Output/100),
    200W impedance, DC-coupled

  • Blanking: 0 V during ramp, +12V during flyback

  • Flyback: 5 msec duration

  • Trigger Pulse:
    (Width 100 msec, rise time 1 msec)
    +5 V pulse at ramp start,
    -5 V pulse at flyback start

Dectector AmplifierBandwidth DC to 300 kHz (53 dB):Minimum Detectable=1mW

Signal (Silicon Detector):

  • Gain: 0-100 mV/nA, continuously variable

  • Output: 200 W impedance, ± 10 V max

Power Input

  • Voltage: 110-120 VAC / 220-240 VAC, rear panel switchable

  • Frequency: 50- 60 Hz

  • Power: 12 W, rear panel fused

  • Dimensions:
    W=270mm (10.6 inches)
    H=292mm (3.6 inches)
    L=188 mm (7.4 Inches)

  • Weight: 2.75 kg (6.0 lb)