Bandpass Filter
(BP Series)
Parameter
Center Wavelength nm
nm
Min. Filter Pass Band @-0.5dB nm
Max. Insertion Loss over Pass Band dB
Wavelength Suppression ( 1000~1058 & 1068~1100 nm) for 2nm dB
Wavelength Suppression ( 1000~1054 & 1074~1100 nm) for 8nm dB
Min. Return Loss (for SM fiber) dB
Max. Polarization Dependent Loss   dB
Thermal Stability dB/°C
Max.Optical Power(Continuous Wave) W
Max. Peak Power for ns pulse KW
Max. Tensile Load N
Operating Temperature °C
Storage Temperature °C
*IL is 0.5 dB higher, RL is 5 dB lower for each connector added.Optical power will be only 1W with connector added.
Optical Power for reflect band is 1W or less Optical Power for reflect band is higher than 1W
Note: MMF Port is to take out useless light.
Ordering Information
BP-①①①①②③④⑤⑥⑦C,W BP-①①①①②③④⑤⑥⑦P,W&KW
①①①①: Wavelength ②: Pass Bandwidth ③: Connector Type ④: Fiber Type
1064 - 1064 nm 2 - 2 nm 1 - FC/UPC B - 250 μm bare fiber
SS - Specify 8 - 8 nm 2 - FC/APC L - 900 μm loose tube
3 - SC/UPC S - Specify
4 - SC/APC
N - None
S - Specify
⑤: Fiber Length ⑥: Port ⑦: Fiber Type
1 - 1.0 m 2 - 2 ports 1 -  HI1060
S - Specify 3 - 3 ports 2 - Liekki, Passive-10/125 fiber, NA0.08
3 - CorActive SCF-UN-20/125 fiber, NA0.08
50
2
1.0
25
50
NA 25
8
1.0
NA
Chioce the Bandwidth K11719
CWL Tolerance
Specifications
± 1
ValueUnit
1064
0.3,0.5,1...10
≤ 0.005
0.1