产品编号: 781060-01
将PC转换为CANopen主节点，然后可以连接到第三方CANopen网络并进行通信。
CANopen接口设备为CANopen应用提供高速接口。 CANopen是基于控制器局域网(CAN)物理层的高级通信协议，最初专用于面向运动的机器控制网络，但现在却广泛用于各种产品和应用，包括医疗设备、海事电子、楼宇自动化等。 借助NI-Industrial Communications for CANopen驱动程序，您可以批量编辑SDO，配置支持LSS服务的从节点，以及执行网络管理(NMT)、心跳、节点保护和CANopen同步功能。
NI-Industrial Communications for CANopen 1.0.2 Help
Edition Date: July 2012
Part Number: 373254C-01
»View Product Info
| Download Help (Windows Only) |
This topic lists specifications for PCI-CANopen hardware.
| Transceiver | NXP PCA82C251 |
| Max baud rate | 1 Mbps |
| Min baud rate | 10 kbps |
| CAN_H, CAN_L bus lines | –36 to +36 VDC |
Digital I/O Characteristics
| Parameter | Min | Max |
|---|---|---|
| Output0, Output1 | ||
| VOH (IOH = –8 mA) | 3.8 V | — |
| VOL (IOL = 8 mA) | — | 0.44 V |
| NERR | ||
| VIH | 2.0 V | — |
| VIL | — | 0.8 V |
| Dimensions | 10.67 x 16.76 cm (4.2 x 6.6 in.) |
| I/O connector | 9-pin male D-SUB for each port |
| +5 VDC (±5%) | 640 mA typical |
| +3.3 VDC (±5%) | 940 mA typical |
| Withstand | 500 Vrms, verified by a 5 s dielectric withstand test |
| Continuous | 60 VDC, Measurement Category I |
| Withstand | 500 Vrms, verified by a 5 s dielectric withstand test |
| Continuous | 60 VDC, Measurement Category I |
This product meets the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use:
IEC 61010-1, EN 61010-1
UL 61010-1, CSA 61010-1
For UL and other safety certifications, refer to the product label or the Online Product Certification section.
| Operating temperature | 0 to 55 °C |
| Storage temperature | –20 to 70 °C (Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2.) |
| Operating humidity | 10 to 90% RH, noncondensing |
| Storage humidity | 5 to 95% RH, noncondensing (Tested in accordance with IEC-60068-2-56.) |
| Maximum altitude | 2000 m |
| Pollution Degree (IEC 60664) | 2 |
Indoor use only.