CW and Pulsed Up to 150 MHz
GUI Software Interface
Analog Modulation and Variable Power Control
USB and RS-232 Control
Available with Permanent Fiber Attachment & Polarization Maintaining Single Mode Fiber
These Coherent high-performance, full-featured diode laser systems, deliver the most power, stability and performance—in the smallest package—with the best value. It can be operated as a CW laser or be digitally modulated up to 150 MHz with a TTL source. Laser output power can be adjusted under CW and pulsed operation either through RS-232, USB or the BNC analog input on the control box. Included with each laser is full-featured interface software, which displays how long the laser has been in use, the actual laser output power and the diode and baseplate temperature. Users can also set laser diode mode of operation (CW or pulsed) as well as the laser output power. Every system ships with a full-feature cable, which allows access and control to all laser capabilities. A compact 6V supply, a control box for safety features, USB cable and software to drive the laser are also included. Optional Heat Sink includes exhaust fan and mounting hardware. Typical applications include Flow Cytometry, Confocal Microscopy, Microarrays, Genomics, Proteomics, Medical Diagnosis, and Environmental Monitoring
| Digital Modulation | |
| Maximum Bandwidth | 150 MHz |
| Rise or Fall Time (10% to 90%) | <2 ns |
| Modulation Depth (Extinction Ratio) | >1,000,000:1 at 0 Hz |
| >250:1 at 150 MHz | |
| Analog Modulation | |
| Maximum Bandwidth | 350 kHz |
| Rise or Fall Time (10% to 90%) | <1 µsec |
| Modulation Depth (Extinction Ratio) | >10,000:1 |
| Size | |
| Laser Head Size (L x W x H) | 100mm x 40mm x 40mm |
| Control Box Size (L x W x H) | 138mm x 62mm x 26mm |
| Power Supply Size (L x W x H) | 87mm x 47mm x 32mm |
| Heat Sink (Optional) | 127mm x 66mm x 44mm |
连续输出和脉冲输出（频率可达150MHz）
GUI软件界面
模拟调制和功率可变调制
USB和RS232控制
CDRH 等级 IIIb
这种二极管激光器为Coherent 公司生产，集众多优点于一身（输出功率大，工作稳定可靠，尺寸精巧，价格实惠）。可作为连续激光或用TTL数字调制到150kHz,输出功率可通过连续或脉冲信号调整，也可以通过RS-232，USB或BNC模拟输入来控制。每个激光器通过软件界面可显示工作时间，实际输出功率和二极管温度、主板温度等。使用者也可以自己设置激光器的工作模式（脉冲方式或连续方式）和输出功率。每个系统装载着一个电缆，能够控制各个激光器的能量。本产品的附件包括：6V 电源，控制盒，USB线和USB软件（驱动激光器）。可选带风扇的散热器和安装件。