IR wavelengths out to 2.2 µm
Adjustable gain settings
Compact housing for tight spaces
Battery powered
Our IR photoreceivers operate out to 2.2 µm for IR laser or signal detection. With a compact housing and an adjustable gain setting, this photoreceiver is easy to use. The three-setting gain adjustment allows you to keep your signal from going off scale while you’re adjusting your experiment or measurement.
| Model | Description | Availability | Price | Qty. | |
|---|---|---|---|---|---|
| 2034 | IR InGaAs Photoreceiver, 1.0 mm, 800-2200 nm, 8-32 and M4 | Contact Sales |
Utilizing an extended InGaAs PIN photodiode, this IR photoreceiver is ideal for application from 800 - 2200 nm.
The three-setting gain adjustment allows you to keep your signal from going off scale while you’re adjusting your experiment or measurement. You can choose a 50-Ω or 10-kΩ load resistor, or you can select the open-circuit setting and provide whatever load resistor you like.
The compact housing lets you slide the photoreceiver in wherever you need to quickly check your signal. Since all switches and connectors are located on the top of the housing, you won’t have to worry about access or about cables that drag on the table and block your beam.
These photoreceivers are battery powered so you’ll need only a single coaxial cable to connect the photodetector to other instruments. To ensure long battery life, we build these photoreceivers using amplifiers with low-current draws. If you’re unsure about the battery status, the built-in battery check can tell you instantly whether or not the battery is good.
| 2034 | |
|---|---|
| Wavelength Range (nm) | 800-2200 |
| Conversion Gain, Maximum (V/W) | 2.2x106 |
| NEP (pW/√Hz) | 43 |
| Output Impedance | 100 |
| Detector Material | InGaAs |
| Output Connector | Male BNC |
| Responsivity (Peak) | 1.1 A/W |
| Transimpedance Gain | 2x103, 105, & 2x106 V/A |
