连续波Ti：Sapphire激光器具有很宽的波长调谐范围（700-1000 nm），并发现它是许多基础研究领域（尤其是各种光谱学应用）的有用工具。
波长调谐是由双折射Lyot滤光片进行的，可以手动控制，也可以通过USB连接到PC的步进电机来控制。可以选择将两个标准具放入腔中，以将生成的辐射的线宽缩小到2 GHz。
CW Ti：Sapphire激光器需要由532 nm的CW DPSS泵浦激光器泵浦。我们公司提供不带泵浦激光器的振荡器，以及集成泵浦激光器且泵浦功率从2 W到8 W不等的振荡器。
提供可选的光纤耦合修改。辐射被引导到纤芯直径为4 um的光纤中。光学方案允许通过倒装安装架在自由空间和光纤输出之间轻松切换。
应用领域：
生物成像
电信与半导体研究
其他基础与应用研究
技术指标：
| Standard models and available pump laser power matrix | ||
| Pump laser power | TiC output power at 800 nm (free-space) | TiC output power at 800 nm (fiber-coupled, optional) |
| 3 W | >400 mW | >250 mW |
| 5 W | >800 mW | >500 mW |
| 6 W | >1.2 W | >900 mW |
| 8 W | >1.8 W | >1.2 W |
| General optical specifications | ||
| Wavelength tuning range | 700-1000 nm (customized wavelengths in the range of 690…1060 nm) | |
| Output linewidth | <45 GHz (default) | |
| <20 GHz (with 1 intra-cavity etalon, optional) | ||
| <2 GHz (with 2 intra-cavity etalons, optional) | ||
| Pump laser | integrated or stand-alone DPSS 480…550 nm low-noise pump laser (up to 8 W); | |
| the pump laser must have low amplitude noise and have a TEM00 spatial mode | ||
| Fiber output (optional) | FC socket, SMF FC-FC patch-cord, length 1 m, core dia 4 um | |
| Spatial mode and M^2 | TEM00 (M2 <1.2) | |
| Output beam diameter (at 1/e2) | <2 mm | |
| Output polarization | linear, horizontal, PER >100:1 | |
| Beam divergence | <1 mrad | |
| Long-term output power stability1) | <0.2% rms | |
| Physical dimensions (L × W × H) | ||
| Laser head | 427 × 300 × 129 mm (including integrated pump laser) | |
| 427 × 200 × 123 mm (for external pumping) | ||
| Integrated pump laser control unit | 353 × 360 × 119 mm | |
| Closed-loop chiller unit | 430 × 340 × 190 mm | |
| Environmental and utility specifications | ||
| Operating temperature | 15-30 °C | |
| Relative humidity | <60%, non-condensing | |
| Voltage | single-phase; 100-240 VAC; 50/60 Hz | |
| Power consumption | <1.5 kW | |
| Available factory configuration packages2) | ||
| Thermally stabilized monolithic body | included in any package | |
| “Manual” factory package | – birefringent Lyot filter with manual micrometer screw adjustment | |
| – (optional) one or two intracavity etalons with manual adjustment | ||
| “Basic” factory package (default) | – birefringent Lyot filter with step-motor adjustment | |
| – (optional) one or two intracavity etalons with manual or step-motor adjustment | ||
| – motorized wavelength tuning with remote control | ||
| – basic Windows software with wavelength tuning remote control capability | ||
| “Auto” factory package | – birefringent Lyot filter with step-motor adjustment | |
| – (optional) one or two intracavity etalons with manual or step-motor adjustment | ||
| – built-in spectrometer | ||
| – built-in power meter | ||
| – active output power stability locking3) | ||
| – BRF control and etalons (optional) control via single Windows software application | ||
| – extended Windows software version, incorporating monitoring of operational parameters and single-click wavelength tuning | ||
1) – after 30 min warm-up with cold start, during 12-hour continuous operation under equal room temperature conditions using factory-supplied/recommended stabilized closed-loop chiller with proper capacity and factory-supplied/recommended low-noise on-board integrated highly stable pump laser with active power locking turned ON; “Auto” package only;
2) – please select one of the packages as basis for your system; certain features may be tailored or combined differently according to specific customer requirements;
3) – available only with certain manufacturer-certified pump laser models, please enquire.