High precision Fiber Rotator— 466A-717Specifically designed accessories for the 466A Fiber Alignement Stage
Fiber Rotators and Holders
Lens Holders
Fixed Brackets
Clamp Set
All fiber holders and accessories are compatible with the 466A Series Flexure Stages. The optical-axis height is 18 mm above the platform surface and, with the flexure stage, 94 mm overall. Where necessary, a locating tongue forms part of the accessory. A standard clamp system (M-) 466A-154 is used. It is included with the (M-) 466A Flexure Stages and the fixed bracket accessories, model (M-) 466A-147 , (M-) 466A-148 , and (M-) 466A-149 .
Designed for the most demanding rotation and alignment of angular sensitive components
Slotted design for easy insertion and removal of fiber
Full 360° coarse adjustment range
10° fine adjustment range with 5 arc sec sensitivity
+/-90° scale with 0.5° vernier graduation
V-block preset on axis with less than 1µm concentricity error
V-block can be re-centered by user
Fiber held in double V-groove by two clamp arms (same as 466A-710)
Holds 125/250µm stripped fibers
Clamp force adjustable from 25 - 125 g (466A-709 and 466A-710 only)
High precision Fiber Rotator— 466A-717
Economical fiber rotator designed for less demanding rotation alignment
Slotted design for easy insertion and removal of fiber
Full 360° rotation
Sensitivity approximately 0.1°
Fiber held in 250 µm V-groove by single clamp arm (same as 466A-711)
V-block can be re-centered by user
Fiber Rotator—466A-718
Holds optical fibers terminated with a cylindrical ferrule
Can also be used to hold GRIN lenses
“V” groove formed by two stainless steel rods 9mm long
Nylon clamp screw avoids damage to component being held
For ferrules of diameter 1 - 2 mm or 2 - 4.5 mm
Ferrule holder 2–4.5 mm— 466A-700
Ferrule holder 1–2mm— 466A-701
Holds 125/250µm stripped fibers (holders for other diameter fibers available upon request)
Contact point on fiber is a resilient pad
Very easy to use
Single arm bare fiber holder— 466A-709
Double V-groove allows repeatable fiber placing
Clamp arm swings clear of V-groove for easy loading/unloading
Adjustable clamp force from 25-125 g
Dual arm bare fiber holder— 466A-710
Double V-groove allows repeatable fiber placing
Clamp arm swings clear of V-groove for easy loading/unloading
Adjustable clamp force from 25-125 g
Magnetic single arm bare fiber holder— 466A-711
Magnetic clamp arm for fast component changes
Simple economical design
Reversible V-block 4mm long
Holds GRIN lenses 1-2mm and 2-3mm in diameter
GRIN lens holder— 466A-734
Easy insertion and removal of connectorized fibers
Three connector options
FC connectorized fiber holder— 466A-735
SMA connectorized fiber holder— 466A-736
ST connectorized fiber holder— 466A-737
Long-reach fiber holder for 125/250µm bare fibers
Allows locating fibers offset from the central axis
Fiber held in user-replaceable double V-groove by spring clamps
Clamp arm swings clear of V-groove for easy loading/unloading
Clamp force adjustable from 25 - 125 g
Contact point on fiber is a resilient pad
Long reach bare fiber holder— 466A-750
Holds components on top of flexure stages
Locates in either of the two orthogonal slots on top plate for offset component mounting
Universal base— 466A-752
The fixed brackets attach to the steady vertical pillar on the flexure stage using two screws. They provide a convenient rigid surface for mounting standard 466A accessories for alignment with items on the moving top plate of the flexure stage.
466A-147 and 466A-148 for mounting accessories along X axis of 466A flexure stages
466A-149 for mounting accessories along Y axis of 466A flexure stages
6-32 (M4) Tapped holes
Slot lengths: 20 mm, 60 mm, or 46 mm
Includes (M-)466A-154 clamp set
Large fixed bracket, 60mm slot— 466A-147 ( M-466A-147 )
Small fixed bracket, 20mm slot— 466A-148 ( M-466A-148 )
L-shaped bracket, 40mm slot— 466A-149 ( M-466A-149 )
Fitted with a removable stainless steel sleeve cut with the microscope objective thread
Easy adjustment and exchange of objectives or other components having a standard RMS 0.800-36 thread
Objective mount— 466A-150
Provides a basic platform for mounting of non-standard components
Component plate— 466A-153
Clamp set for use with 466A Series Flexure Stages and Accessories
Note: One Clamp Set is supplied with all 466A flexure stages and with the (M-) 466A-147, (M-) 466A-148, and (M-) 466A-149 brackets
Clamp set— 466A-154
Extension tube for use on 466A-150 Objective Mount
Extends reach by 25mm allowing access to components on wide platforms
Provides a simple fixed platform for mounting standard devices and fiber holders
To be used with the (M-) 466A-147 , (M-) 466A-148 and (M-) 466A-149 fixed brackets
Bolted directly to an optical breadboard, provides an optical height of 94mm (compatible with the 466A Series Flexure Stages)