PROFINET interface for I/O
Master configuration
I/O addresses are automatically mapped as Tags in the controller for use by all modules (Operator Interface, Motion Program, and Scope tools)
PCI form factor
Two RJ45 connectors
Set up with Sycon.net
PROFINET I/O is tightly integrated into the A3200 automation machine controller. Devices are configured with the card setup tool that generates the Fieldbus network topology definition. The user can then map the I/O with meaningful tag names that are available for use in the AeroBasic™ programming language directly, as well as in any of the applications such as the Scope or Motion Composer.
All PROFINET I/O is easily mapped to the input and output memory. Programmers can map the I/O points to Tags that are shared with all parts of the system logic, motion, Operator Interface, or Scope tools. In the Scope tools, the Tags can be plotted alongside other I/O including drive I/O, motion states (position, velocity, acceleration, or motor currents), or other tags. The shared Tags are available in all of the programming languages automatically by name. Programming languages include AeroBasic™, LabVIEW®, C, or .NET. PROFINET provides a standard interface into the full A3200 machine controller.
128 11472 Bytes Read/Write/Record; Max 4096 Bytes/Request 100 meters 100 Mbits/s Three LEDs per card 120 mm x 86 mm x 18.5 mm (L x W x H) -20 to 55°C -MACHINESpecifications
PROFINET Specifications
PROFINET Controller Max I/O Devices Cyclic Data (max) Acyclic Data (max) Cable Length Data Transfer Rates Hardware Diagnosis Dimensions Operating Temperature Ordering Information
PROFINET Ordering Information
Ordering Example
A3200-IA -MACHINE -4 AXES -PROFINET -MOTION DESIGNER -MAINTENANCE-1-0 Ordering Options
Software License Number of Axes Controller Options Motion Composer (MC) Options Maintenance A3200-IA -2 AXES
-4 AXES
-6 AXES
-8 AXES
-10 AXES
-12 AXES
-14 AXES
-16 AXES
-32 AXES-PROFINET
-ETHERCAT
-FIVE AXIS CONTOURING
-DYNAMIC CONTROLS TOOLBOX
-ENHANCED THROUGHPUT MODULE
-ENHANCED TRACKING CONTROL
-FIBER OPTIC
-PROFESSIONAL
-CNC-MOTION DESIGNER
-CNC OPERATOR INTERFACE
-LABVIEW
-MATLAB
-REMOTE
-MOTION SIMULATOR-MAINTENANCE-y-mm PROFINET Hardware Ordering Information
Options Description -Hilscher-RJ45 Hilscher-RJ45 is a PCI card used for fieldbus connectivity; specific fieldbus configuration is determined by the controller options ordered with the software. Currently supports EtherCAT and PROFINET.