Description

Design Features

Shown with optional YZ, two motorized axis head and granite bridge
2 m/s, 3g max speeds with 1 kg load
100 kg load capacity
Accuracy ±4 µm calibrated, ±25 µm uncalibrated

This is the two-meter travel, direct-drive PRO225LM linear-motor stage. It is used for laser processing, testing, and high-accuracy motion metrology. It is shown mounted (not mandatory) to a granite spar with a motorized YZ two-axis head. The stage can be configured to provide three-axis linear motion.

Specifications

Mechanical Specifications

PRO225LM-2000mm
Positioning	Travel		2000 mm
	Accuracy	LT Standard	±25.0 µm
	Accuracy	HALAR⁽¹⁾	±4 µm
	Repeatability⁽¹⁾		±0.75 µm
Geometric	Straightness⁽¹⁾		±20.0 µm
	Flatness⁽¹⁾		±20.0 µm
	Pitch		±179 µrad (±37 arc sec)
	Roll		±179 µrad (±37 arc sec)
	Yaw		±223 µrad (±46 arc sec)
Dynamic	Maximum Speed⁽²⁾		2 m/s
Dynamic	Maximum Acceleration⁽²⁾		3g
Other	Maximum Force (Continuous)		See BLM-203-A (with cooling)
	Load Capacity⁽³⁾	Horizontal	100 kg
	Load Capacity⁽³⁾	Side	100 kg
	Moving Mass		7.4 kg
	Stage Mass		78 kg (no hardcover)
	Material		Aluminum body/black anodize finish/hardcoat
	Protection		No protection; components exposed from top of stage; hardcover or bellows optional - consult factory

Certified with -PLOTS option.
Speed and acceleration based on no load.
Maximum load based on bearing capability. Maximum application load may be limited by acceleration requirements.
Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.

Description

Design Features

Specifications

Mechanical Specifications

Dimensions

Ordering Information