Description

Design Features

1 m travel
3 m/s, 4 g with 1 kg load
Mechanical bearings
60 kg load capacity
Accuracy 5 µm calibrated, ±50 µm uncalibrated
Vacuum 10^-6 Torr

This is a high acceleration, compact-footprint linear actuator designed for HARP high-acceleration, reciprocating probe applications. The long-travel actuator provides exceptional velocity stability and precise positioning in a very small footprint. It can be made for either air or vacuum-rated applications.

Specifications

Mechanical Specifications

ACT200HA
Positioning	Travel		1100 mm (travel is reduced based on speed and acceleration requirements; travel for max speed specified is 1000 mm)
	Accuracy	LT Standard	±50.0 µm
	Accuracy	HALAR⁽¹⁾	±1 µm
	Repeatability⁽¹⁾		±1 µm
Dynamic	Maximum Speed⁽²⁾		3 m/s
Dynamic	Maximum Acceleration⁽²⁾		4g
Other	Maximum Force (Continuous)		100 N
	Load Capacity⁽³⁾	Horizontal	60 kg
	Load Capacity⁽³⁾	Side	30 kg
	Moving Mass		5 kg
	Stage Mass		48 kg
	Material		Aluminum body/no finish
	Vacuum Rating		10^-6 Torr

Certified with -PLOTS option.
Speed and acceleration based on 1 kg load.
Maximum load based on bearing capability. Maximum application load may be limited by acceleration requirements.
Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and work-point dependent. Consult factory for multi-axis or non-standard applications.

Description

Design Features

Specifications

Mechanical Specifications

Dimensions

Ordering Information