The M-GW3036-PG4-L Guardian™ Active Isolation Workstation delivers sub-hertz vibration isolation (six degrees of freedom) in a plug-and-play form factor.  The Guardian platforms dynamically responds to vibrations in the environment enabling sub-hertz vibration isolation starting at 0.5 Hz and reaching 20 dB attenuation (10X) at 1.5 Hz. The M-GW3036-PG4-L provides a 750 x 900 mm table surface at a working height of 868 cm.  It can support a payload of 86 kg.  Guardian workstations feature 110 mm thick damped PG breadboards, a rigid fully welded frame with casters, integrated active and passive isolation modules, ultra-low noise electronics and advanced DSP control system, and a user friendly, computer interface.  All of these features have been designed specifically to deliver high performance and improve ease-of–installation and set-up.

• 宽度

  750 mm

• 长度

  900 mm

• 平台

  110 mm Precision Grade Breadboard

• 安装孔

  M6

• 负载

  86.2 kg

• 密封孔类型

  Easy clean conical cup 19 mm deep, Non-corrosive high impact reinforced composite material

• 工作表面

  400 series ferromagnetic stainless steel

• 顶部和底部表层

  4.8 mm thick with integrated damping layer

• 
  

M-GW3036-PG4-L监护人™活跃隔离工作站提供sub-hertz隔振(六个自由度)的一种即插即用的因素。Guardian平台能够对环境中的振动做出动态响应，支持从0.5 Hz开始的亚赫兹隔振，在1.5 Hz达到20 dB衰减(10倍)。M-GW3036-PG4-L提供一个750 x 900毫米的工作台表面，工作高度为868厘米。它能承受86公斤的载荷。监护工作站具有110mm厚的阻尼PG电路板，一个刚性全焊接框架与脚轮，集成有源和无源隔离模块，超低噪音电子和先进的DSP控制系统，和一个用户友好的电脑界面。所有这些特性都是专门为提供高性能和提高安装和设置的易用性而设计的。