The S-2000AC-119.5 Cleanroom Stabilizer includes a patented self-centering pendulum design, laminar flow damping system and precision auto-leveling valves to deliver unmatched vibration isolation performance. This 19.5 inch isolator has enhanced leveling indicators, recessed lifting channels and a significantly lower magnetic permeability Aluminum casting construction which greatly improves the ease of use. A 2000 lb load capacity per isolator is an ideal solution for isolating optical tables, large inspection equipment, and heavy machinery. Exclusive laminar flow damping is the heart of the Stabilizer’s unparalleled performance. Unlike single damping orifices, the Stabilizer employs thousands of tiny orifices, resulting in greater damping efficiency overall. The hybrid chamber design minimizes air volume between piston motion and damper airflow. Features include: faster settling time for large and small magnitude disturbances, lower natural frequency for superior protection against hard-to-control low frequencies below 5 Hz, and minimized amplification at resonance. Installation is fast and easy with patented, self-centering pistons. They automatically center the piston at the top and bottom of its vertical stroke, guaranteeing unrestricted movement for optimal performance. SafeLock™ mounting brackets eliminate the need to precisely align isolators and table holes when attaching the isolator to the table. Mechanical height adjustment allows quick and easy table leveling and compensates for non-level floors. Built-in leveling indicators provide visual feedback ensuring the table is properly floating at the correct level.
隔振器高度
19.5 in. (495.3 mm)
单个隔离器负载
2000 lb (907 kg)
隔振器数量
1
是否含连杆法兰
No
自动定心
Yes
稳定时间
1.5 s
重复水平精度
±0.010 in. (0.254 mm)
水平阻尼
Oil
水平隔振,5 Hz
85%
水平共振频率
1.5 Hz
水平隔振,10 Hz
95%
垂直隔振,10 Hz
98%
垂直隔振,5 Hz
94%
垂直共振频率
1 Hz
高度调节
+1.3 in. (33 mm)
共振时的水平放大率
9 dB
共振时的垂直放大率
10 dB
最大空气压力
85 psi (586 kPa)
是否含浮起高度指示器
Yes
装箱后毛重
80 lb (36 kg)
S-2000AC-119.5洁净室稳定器包括专利的自定心摆设计,层流阻尼系统和精密自动调平阀,提供无与伦比的隔振性能。这台19.5英寸的隔离器增强了水准指示器、凹式提升通道和明显较低的磁导率铝铸件结构,大大提高了使用的方便性。每隔振器负载2000磅是隔离光学工作台、大型检测设备和重型机械的理想方案。独特的层流阻尼是稳定器无与伦比的性能的核心。与单一阻尼孔不同的是,稳定器采用了数千个微小的孔,从而提高了整体的阻尼效率。混合式气室的设计使活塞运动和阻尼气流之间的空气体积最小。其特点包括:对大、小扰动的沉降时间更快,对5hz以下难以控制的低频具有较低的固有频率保护,共振时放大幅度最小。安装快速和容易与专利,自定心活塞。它们自动将活塞放在垂直冲程的顶部和底部,保证不受限制地运动,以获得最佳性能。SafeLock™安装支架消除需要精确对齐光电隔离器和表孔时附加的隔离器。机械高度调整,方便快捷的表调平和补偿非水平地板。内置的水准指示器提供视觉反馈,确保表格正确浮动在正确的水平。