Please note that the OBP series position sensors are being phased out by the end of 2017.

The OBP-A-9L Optical Position Sensing Detector is designed to measure laser beam displacement from 10 μW to 2.5 mW of optical power at rates of up to 30 kHz with sub-micron spatial resolution. The 0.354 inch (9 mm) square detector head comes with an ambient light shield and can be fitted with up to three, stackable filters (ordered separately). The Position Sensing Detector (PSD) head with +/- 15 μm position accuracy connects to the electronics pack via a 9-pin female D-sub connector. This analog version include a second 9-pin male D-sub connector for interfacing the input and output signals, including power input and analog output signals to monitor power and displacement signals. After connecting the ±18 VDC power supply (included) at the input, the user simply plugs the output signals into a DVM or oscilloscope to monitor and record position and laser beam power.

• 波长范围

  350-1100 nm

• 感光尺寸

  9 x 9 mm

• 分辨率

  1 mV (= 1 µW; cw) / 5 mV (pulsed)

• 位置精度

  ±25 µm

• 功率输入范围

  10 µW to 2.5 mW

• 模拟输出电压范围

  -4.5 to +4.5 V

• 最大平均功率密度

  1 mW/mm2  

• 工作温度范围

  0 to 50°C

• RoHS

  Compliant

• 端口类型

  9-Pin Female D-Sub

• 
  

请注意，OBP系列位置传感器将于2017年底淘汰。OBP-A-9L光学位置传感探测器是用来测量激光位移从10μW光功率的2.5 mW利率30千赫的亚微米的空间分辨率。0.354英寸(9毫米)的方形探测器头配有环境光屏蔽，最多可安装三个可堆叠过滤器(单独订购)。位置敏感探测器(PSD)的头+ / - 15μm位置精度通过9针连接到电子包女do连接器。这个模拟版本包括第二个9引脚插头D-sub连接器，用于接口输入和输出信号，包括电源输入和模拟输出信号，以监测功率和位移信号。后连接±18伏直流电源(包括)输入,用户只需插头输出信号到数字式电压表或示波器监视和记录位置和激光功率。