The 76595 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between 0.2 and 0.27, a 180 to 2200 nm spectral range, and θ1/2 Divergence Range of 0.15° to 0.50°. The lens is mounted in our standard 1.5 Inch Series housing to easily mate with our standard products. It accepts the 11 mm OD of our Oriel® Fiber Connectors. This probe supports a 18 to 23 mm typical beam size and a 25 to 150 mm collimation zone. Beam size ranges are driven by wavelength and source size dependent properties of the optical design. The half angle divergence is a function of the focal length and source size.

• 类型

  Collimating Beam Probe

• 典型光斑尺寸

  18 - 23 mm

• 典型准直区间

  25 - 150 mm

• 波长范围

  180-2200 nm

• 法兰系列尺寸

  1.5 Inch

• 
  

76595光纤束准直探头对光纤束高度发散的输出进行准直。这个梁探针用于校准我们的纤维束的输出NA在0.2和0.27之间,180到2200纳米光谱范围,θ1/2散度范围的0.15°到0.50°。镜头安装在我们的标准1.5英寸系列机壳上，很容易与我们的标准产品相匹配。它接受的11毫米OD凸肚®光纤连接器。这种探头支持18至23毫米的典型光束大小和25至150毫米准直带。光束尺寸范围由波长和光源尺寸相关的光学设计特性决定。半角散度是焦距和源大小的函数。