The 919E-0.1-12-250 high damage threshold pyroelectric energy detector is for low energies with a 12 mm aperture. It can measure energies from 7µJ up to 10mJ. It can operate at repetition rates up to 250 Hz and covers the spectral range from 0.15 - 3, and at 10.6µm. The sensor comes with a standard 1.5 meter cable for connecting to a power meter. Compatible with power meter models 1919-R, 843-R, 843-R-USB, and 841-PE-USB.  Since certain specifications are interrelated with various settings, please refer to the complete specifications sheet under Resources below to determine if this product meets your requirement.  Cable length is 1.5 meters.  It has a 1/4-20 tapped hole for post or plate mounting and comes with a 1/2 inch diameter post.

• 探测器材料

  BF coating

• 探测器类型

  Pyroelectric

• 光谱范围

  0.15 to 3 and 10.6 µm

• 感光尺寸

  Ø12 mm

• 最大重复频率

  250 Hz

• 最大脉冲宽度

  5 ms

• 有衰减器时的最大脉冲能量

  10 mJ

• 最大平均功率

  3 W

• 噪声等效能量

  1 µJ in 1 ms, 5 µJ in 5 ms setting

• 冷却

  Sensor Body

• 端口类型

  DB15

• 反射率

  20% approx.

• 工作温度

  15°C to 35°C, <70% RH, non-condensing

• 存储温度

  0°C to 50°C, <90% RH

• 尺寸

  Ø62 x 21 mm

• 重量

  0.25 kg

• RoHS

  Compliant

• 校准不确定度

  ±3% basic, add ±2% @ 0.2-3 µm, ±5% @ 10.6 µm

• 损伤阈值

  0.8 J/cm2 (<100 ns pulse), 1 J/cm2 (1 µs), 2 J/cm2 (300 µs)

• 线性度

  ±2%

• 
  

919E-0.1-12-250高损伤阈值热释能探测器适用于12毫米孔径的低能量环境。它可以测量能量从7µj 10乔丹。它可以运行重复频率250赫兹,涵盖了光谱范围从0.15 - 3和10.6µm。传感器带有标准的1.5米电缆，用于连接到功率表。兼容1919-R, 843-R, 843-R- usb和841-PE-USB。由于某些规格与各种设置相关，请参阅下面参考资料下的完整规格表，以确定该产品是否满足您的要求。电缆长度为1.5米。它有一个1/4-20的抽头孔，用于柱或板安装，并带有一个1/2英寸直径的柱。