The 919E-0.1-12-25K pyroelectric energy detector is for low energies and has a 10 mm diameter aperture. It can measure energies from 1 µJ to 10 mJ. It can operate at repetition rates up to 25 kHz and covers the spectral range from 0.15 - 12 µm. The sensor comes with a standard 1.5 meter cable for connecting to a power meter. Compatible with power meter models 1919-R, 843-R, 843-R-USB, and 841-PE-USB.   Since certain specifications are interrelated with various settings, please refer to the complete specifications sheet under Resources below to determine if this product meets your requirement.  Cable length is 1.5 meters.  It has a 1/4-20 tapped hole for post or plate mounting and comes with a 1/2 inch diameter post.

• 探测器材料

  Metallic absorber

• 探测器类型

  Pyroelectric

• 光谱范围

  0.24 to 12 µm

• 感光尺寸

  Ø12 mm

• 最大重复频率

  25 kHz

• 最大脉冲宽度

  30 µs

• 有衰减器时的最大脉冲能量

  10 mJ

• 最大平均功率

  2 W

• 噪声等效能量

  0.1 µJ in 1 µs, 0.15 µJ in 30 µs setting

• 冷却

  Sensor Body

• 端口类型

  DB15

• 反射率

  50% approx.

• 通光孔径

  Ø12 mm

• 工作温度

  15°C to 35°C, <70% RH, non-condensing

• 存储温度

  0°C to 50°C, <90% RH

• 尺寸

  Ø62 x 21 mm

• 重量

  0.25 kg

• RoHS

  Compliant

• 校准不确定度

  ±3% basic, add ±4% @ 240-800 nm, ±8% @ 2-3 µm, ±15% @ 10.6 µm

• 损伤阈值

  0.1 J/cm2 (<100 ns pulse), 0.2 J/cm2 ( 1 µs), 3 J/cm2 (300 µs)

• 线性度

  ±1.5%

919E-0.1-12-25K焦热电能探测器是低能量的，直径为10毫米。它可以测量能量从1µJ 10乔丹。它可以运行在重复率25 kHz,覆盖光谱范围从0.15 - 12µm。传感器带有标准的1.5米电缆，用于连接到功率表。兼容1919-R, 843-R, 843-R- usb和841-PE-USB。由于某些规格与各种设置相关，请参阅下面参考资料下的完整规格表，以确定该产品是否满足您的要求。电缆长度为1.5米。它有一个1/4-20的抽头孔，用于柱或板安装，并带有一个1/2英寸直径的柱。