The 918D-IS-1 Universal Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible regardless of the fiber type measured. The integrating sphere uses a novel dual detector design with special optics that improve temperature sensitivity markedly from ordinary detectors. It is fully calibrated to traceable standards over the wavelength range of 410–1650 nm. The calibration data is encoded in a calibration module integral to the electrical connector. The 918D-IS-1 has an integral DB15 connector and is compatible with Newport's new power meters. Maximum versatility is provided by the detector’s dual port design. A variety of adaptors for connector-terminated fibers are provided and plug into the detector’s front port. The rear port is designed to measure light from straight and angle cleaved bare fibers using Newport’s FP3-FH1 bare fiber holder. A complete kit of adaptors, including the FP3-FH1, is included with each detector together with a rugged carrying case. Model 818-IS-1, which has a legacy 8-pin DIN connector, is available offline only.

• 探测器类型

  Fiber Optic

• 光谱范围

  410 - 1650 nm

• 最大可测量功率

  30 W/cm2

• 最大功率密度

  30.0

• 最大脉冲能量（无衰减器）

  100 µJ

• 功率范围

  1 nW - 200 mW

• 校准不确定度（无衰减器）

  5% @ 410-640nm, 3% @ 641-1650 nm

• 线性度

  ±0.5 %

• 材料

  InGaAs and Silicon

• 上升时间

  ≤2 µs

• 工作温度范围

  5 to 50°C, <70% RH

• 端口类型

  DB15

918D-IS-1型通用光纤探测器采用对称积分球设计，以确保无论何种光纤类型都能进行最精确的校准。积分球采用了一种新型的双探测器设计，带有特殊的光学器件，显著提高了普通探测器的温度灵敏度。在波长范围410-1650纳米的范围内，它被完全校准到可追踪的标准。校准数据编码在电气连接器集成的校准模块中。918D-IS-1有一个完整的DB15连接器，与新港的新功率表兼容。探测器的双端口设计提供了最大的通用性。提供了用于连接端端光纤的各种适配器，并将其插入检测器的前端口。后端口的设计，以测量光从直和角度裂开裸露纤维使用新港的FP3-FH1光导纤维支架。一套完整的适配器，包括FP3-FH1，包括每个探测器和坚固的携带盒。型号818 is -1，它有一个遗留的8针DIN连接器，只能脱机使用。