The 918D-IS-IG Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible, regardless of the fiber type measured. The 918D-IS-IG uses a single InGaAs detector and is calibrated over the range of 800-1650 nm. The calibration data is encoded in a calibration module integral to the electrical connector. The 918D-IS-IG has an integral DB15 connector and is compatible with Newport's new power meters. Maximum versatility is provided by the detector’s dual port design. A variety of adaptors for connector-terminated fibers are provided, and plug into the detector’s front port. The rear port is designed to measure light from straight and angle cleaved bare fibers, using Newport’s FP3-FH1 bare fiber holder. A complete kit of adaptors, including the FP3-FH1, is included with each detector, together with a rugged carrying case.

• 探测器类型

  Fiber Optic

• 光谱范围

  800 - 1650 nm

• 最大可测量功率

  30 W/cm2

• 最大功率密度

  30.0

• 最大脉冲能量（无衰减器）

  100 µJ

• 功率范围

  1 nW - 200 mW

• 校准不确定度（无衰减器）

  3% @ 800-1650 nm

• 材料

  Indium Gallium Arsenide

• 上升时间

  ≤2 µs

• 工作温度范围

  5 to 50°C, <70% RH

• 端口类型

  DB15

918D-IS-IG光纤探测器采用对称的积分球设计，以确保尽可能精确的校准，无论测量的是何种光纤类型。918D-IS-IG型使用单一的InGaAs探测器，校准范围为800-1650纳米。校准数据编码在电气连接器集成的校准模块中。918D-IS-IG有一个完整的DB15连接器，与新港的新功率表兼容。探测器的双端口设计提供了最大的通用性。为连接端端光纤提供了各种适配器，并将其插入检测器的前端口。后端口是设计来测量光从直和角度裂开的裸纤维，使用新港的FP3-FH1光导纤维支架。包括FP3-FH1在内的一套完整的适配器，连同一个坚固耐用的携带盒一起包含在每个检测器中。