The 819C-IG-5.3-CAL is a NIST traceable calibrated integrating sphere detector using a 5.3" integrating sphere with a high performance InGaAs photodetector. The input port size is 1.0" diameter and the wavelength range is 860 – 1650 nm. It comes with an SMA fiber optic connector on the North pole as a standard feature allowing a small amount of light pickoff for wavelength measurement or any further analysis without affecting the overall system calibration.

Note that the system calibration is no longer valid if any component is changed from the original calibrated configuration. For a very high power level, elevated temperature of the integrating sphere system can affect the measurement accuracy so the sphere must be temperature controlled. Calibration is performed without attenuator.

If you have a legacy optical power meter that requires an 8-pin DIN calibration module, order 819C-IG-5.3-CAL/CM.

• 探测器类型

  Sphere Detector

• 感光尺寸

  Ø3 mm

• 光谱范围

  860 - 1650 nm

• 功率范围

  1 µW - 4.5 W

• 材料

  Indium Gallium Arsenide

• 球体尺寸

  5.3 in.

• 输入端口尺寸

  1.0 in.

• 端口类型

  DB15

• 
  

819c - ig- 5.3 cal是NIST可跟踪校准的积分球探测器，使用5.3英寸的积分球和高性能的InGaAs光电探测器。输入端口尺寸为1.0”直径，波长范围为860 - 1650 nm。它带有一个位于北极的SMA光纤连接器作为标准特性，允许少量的光传感器进行波长测量或进一步分析，而不会影响整个系统的校准。请注意，如果任何组件从原来的校准配置更改，则系统校准不再有效。在功率很高的情况下，积分球系统的温度升高会影响测量精度，因此必须对积分球进行温度控制。校准没有衰减器。如果您有一个遗留光功率计，需要一个8针DIN校准模块，订单819c - ig- 5.3 cal /CM。