The 818-UV/DB Low-Power UV Enhanced Silicon Photodetector is supplied with a NIST traced calibration report that details individual detector responsivity measured with and without attenuator. Exclusive OD3 attenuator technology extends the calibrated optical dynamic range of our photodiode sensor heads by three decades. The serial numbers for the detector and the attenuator are matched to ensure NIST traceability. The 10 mm clear aperture with the cross hair will improve the detector alignment to the input optical beam more accurately and help avoid detector overfilling. This model includes a BNC/DB15 calibration module. The adapter contains the detector calibration data, model number, serial number and calibration date for seamless operation. Also available are a variety of accessories such as collimating lens assemblies, fiber optic adapters, and a bare fiber adapter, and a 1 inch optic holder. Note that Model 818-UV/CM is available offline only. Model 818-UV is no longer available.

Please refer to Newport Power Meter and Detector Legacy and Compatibility for a complete list of meters that are compatible with this model.

818紫外/DB低功率紫外增强硅光电探测器提供了NIST跟踪校准报告,详细说明了在有衰减器和没有衰减器的情况下测量的单个探测器响应率。独特的OD3衰减器技术使我们的光电二极管传感器头的校准光学动态范围延长了30年。检测器和衰减器的序列号匹配,以确保NIST可追溯性。带有十字丝的10mm光圈将提高探测器对输入光束的对准度,并有助于避免探测器过载。该模型包括一个BNC/DB15校准模块。适配器包含探测器校准数据、型号、序列号和校准日期,以便无缝操作。也有各种配件,如准直镜头组件,光纤适配器,和裸光纤适配器,和1英寸的光学支架。请注意,型号818 uv /CM只能脱机使用。型号818-UV不再可用。请参考新港功率表和探测器遗留和兼容性与此型号兼容的表的完整列表。