仪器介绍
易用型驱动器提供精密的速度控制和转速数字显示——计量应用的理想选择
流速：0.6~3400mL/min（取决于驱动器转速和泵管尺寸）
四位LED显示电机转速——方便观察速度设置
双向马达——使用前后可清理泵管，可双向传输流体
强劲的驱动器可叠加2个或4个泵头，增加流速，用于多通道应用，薄膜按键，前面板控制，可设置速度、运行方向、开/关。单独的速度和电源（开/关）控制，改变驱动器开关状态亦可维持速度设定不变。防溅ABS塑料外壳，防护等级IP33。通过背部的DB9插口，可实现远程控制功能。
随机配备：1.8m电源线，带IEC 320/CEE22插口。

订购指南
速度控制：±0.25%
马达功率：1/10hp(75W)
防护等级：IP33
尺寸（L×W×H）：25.4×21.6×21.6cm
电源：90-260VAC，50/60Hz

07528-30
转速：1-100rpm
可叠加泵头数：4  

• Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications

• Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)

• Three digit LED display shows motor rpm—confirm speed setting at a glance

• Reversible motor—purge tubing before or after pumping; pump fluid in either direction

• LED indicators confirm motor direction

• Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications

• Separate speed and power (on/off) control—maintain speed setting while turning pump on/off

• Stackable, splash-resistant ABS plastic housing; IP33 rated

• Remote control capabilities via a DB9 female connector on back of drive

• Speed control input: 4 to 20 mA or 0 to 10 VDC

• Pump direction (CW/CCW) via open collector or contact closure

• Start/stop via open collector or contact closure

• Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); or control start/stop via footswitch 77595-35. Order control accessories on facing page.

What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.