The LIK-LMP is a light intensity controller kit designed for use with OPS Series Power Supplies. The kit maintains a constant light output from DC arc and quartz tungsten halogen lamps when mounted to the proper housing and connected to an OPS Model Power Supply. The necessary cables and adapters for electrical and mechanical compatibility with the OPS Series Power Supply and Research or Q Series Lamp Housings are included with the LIK-LMP.

A TE cooled Si detector is used as the light sensing head. When used with the OPS-A Series Arc Lamp Power Supplies or OPS-Q Series Power Supplies this detector monitors light output from the DC Arc or QTH light source. Constant feedback of the light output allows the OPS Series Power Supply to determine how much voltage/current should be supplied to the light source in order to keep its output intensity constant as the light source ages. Using the cables supplied with the LIK-LMP for interface with the OPS Series Power Supply, the temperature of the Si detector is monitored and the current supplied to the TE cooler is controlled as well. This stabilizes the temperature of the Si detector, creating consistent detector feedback independent of ambient temperature variations.

The kit includes the following components:

• 71582 Si Detector Head, TE Cooled

• 70062 Thermoelectric Cooler Cable

• 70018 BNC-BNC Cable

• 68952 Adapter Kit to Research Arc Lamp Housings

• 68954 Adpater Kit to Q Series Lamp Housings

• 类型

  Light Intensity Controller Kit

• 使用

  OPS Series Power Supplies and Research Lamp/Series Q Lamp Housings

likl - lmp是一种轻强度控制器组件设计用于OPS系列电源。当安装在适当的外壳上并连接到OPS型号电源时，组件保持直流电弧和石英钨卤素灯的恒定光输出。与OPS系列电源和Research或Q系列灯罩的电气和机械兼容性所需的电缆和适配器包含在likl - lmp中。

光传感头采用TE冷却的Si探测器。当与opa - a系列弧光灯电源或OPS-Q系列电源一起使用时，该检测器监视直流弧光灯或QTH光源发出的光。光输出的持续反馈使OPS系列电源能够确定应该向光源提供多少电压/电流，以便在光源老化时保持其输出强度恒定。利用与OPS系列电源接口的LIK-LMP电缆，对Si探测器的温度进行监测，对TE冷却器的电流进行控制。这就稳定了Si探测器的温度，创造了独立于环境温度变化的一致的探测器反馈。

组件包括以下组件:

71582 Si探测器头部，TE冷却

70062热电冷却器电缆

70018 BNC-BNC电缆

68952适配器套件，以研究弧灯外壳

68954 Adpater组件到Q系列灯罩