Use this Collimator (COL) to delivery light easily and efficiently from your liquid light guide (LLG) into your Olympus Microscope. Product includes microscope mounting ring. Designed to be used with model: SOLA-LLG.The collimator has been designed to provide control over the size of the illuminated area at the sample plane. This design allows the user to maximize the illumination intensity and uniformity for the field of view (FOV) of the eyepiece or camera sensor.The range adjustment is achieved by using two achromatic lenses and adjusting their relative positions within the collimator. The two adjustment knobs must be used in tandem. One is a liquid light guide (LLG) adjustment knob and sets the distance between the LLG and the first lens. The other adjustment is the lens adjustment knob, which determines the distance between the two lenses.Instructions for achieving the smallest and largest uniformity illuminated areas within the FOV can be found under Literature and Documents. The optimum procedure for all alignments is to focus the image of the LLG on the back aperture of the objective.


使用这个准直器(COL)可以轻松高效地将液体导光器(LLG)的光线传送到奥林巴斯显微镜。产品包括显微镜固定环。设计用于模型:SOLA-LLG。准直器的设计目的是在样品平面上控制被照亮区域的大小。这种设计允许用户最大化的照明强度和视野(FOV)的目镜或相机传感器。通过使用两个消色差透镜并调整它们在准直器中的相对位置来实现距离调整。两个调节旋钮必须同时使用。一种是液体导光器(LLG)调节旋钮，设置LLG和第一透镜之间的距离。另一个调节是镜头调节旋钮，它决定了两个镜头之间的距离。在文献和文件中可以找到在FOV内实现最小和最大的均匀照明区域的说明。所有对准的最佳程序是将LLG的图像聚焦在目标的后孔上。