The 710 Temperature Controlled Laser Diode Mount provides a convenient mounting solution for the most demanding laser diode control in the laboratory. Direct access to the laser TO-CAN window is possible on this laser diode mount, for both the TO-9 (9 mm) and TO-56 (5.6 mm) type packages. Collimation of the divergent output of a free-space laser diode is accomplished via the accessories available for these laser diode mounts, in addition to fiber pigtailed diode lasers which are accommodated on this same platform. For collimating divergent output beams, a precision lens alignment mechanism and multiple-element collimating optics are available as accessories. Optimum temperature control is achieved via two built-in 12.5 W Peltier thermoelectric coolers (TEC). To increase system flexibility, the mount incorporates a nitrogen purge fitting, a BNC connector and solder post for modulation (BIAS-T not included), and two temperature sensors (thermistor and AD592CN). The mount can be used with a post and post holder to secure to an optical table or optical breadboard. The mount supports 8-32 and M4 type threaded screws for attachment.

710温度控制激光二极管安装为实验室中要求最高的激光二极管控制提供了方便的安装解决方案。对于to -9(9毫米)和to -56(5.6毫米)型封装，在这个激光二极管安装上可以直接访问激光到罐窗口。自由空间激光二极管的发散输出的准直是通过这些激光二极管支架的附件来实现的，另外光纤梳状二极管激光器也安装在同一个平台上。对发散输出光束进行准直时，可采用精密透镜对准机构和多元件准直光学元件作为附件。通过两个内置的12.5瓦Peltier热电制冷器(TEC)实现最佳温度控制。为了增加系统的灵活性，安装包括氮气吹扫配件、BNC连接器和用于调制的焊点(BIAS-T不包括在内)以及两个温度传感器(热敏电阻和AD592CN)。该支架可与一根柱子和一根柱子支架一起使用，以固定在光学工作台或光学电路板上。该安装支持8-32和M4型螺纹螺丝连接。