The LDM-4415 Laser Diode Mounting Fixture provides a compact, easy to use solution for mounting and temperature controlling CS packaged conductively cooled high power laser diodes. Heat sink technology developed at ILX Lightwave allows the 4415 to dissipate up to 100 W of heat generated by the laser diode with an active temperature control range of +20C to 85C. Fixture design and precision machining result in repeatable thermal resistance between the CS packaged device and mounting block, minimizing the temperature difference between the laser and the fixture. The LDM4415 is compatible with ILX Lightwave high power current sources and temperature controllers through interconnect cabling allowing up to 120A of laser diode current for the highest power conductively cooled laser diode bars. Optical table mounting is made possible through standard 1" spaced mounting holes on the base of the mount.

• 包装类型

  CS Bar

• TE 冷却器

  14.6 A, 28.8 V maximum

• 温度范围

  20 to 85°C

• 温度传感器

  10 kΩ NTC Thermistor

• 最大电流

  125 A  

• 端口类型

  Dual Crown Clip Socket 10-32 Power Lugs (Diode) / Male Hybrid DSUB 7W2 / Female Bananna Jacks (Ground, Forward Voltage)

• 散热性能

  100 W  

• 水温要求

  15°C

• 尺寸

  114 x 108 x 127 mm

• 重量

  1.6 kg  

• 
  

LDM-4415激光二极管安装夹具提供了一个紧凑的，易于使用的解决方案安装和温度控制CS封装的电导冷却高功率激光二极管。在ILX光波发展的散热器技术允许4415消散高达100瓦的热由激光二极管产生的主动温度控制范围+20C到85C。夹具的设计和精密加工使CS封装的装置和安装块之间具有可重复的热电阻，使激光和夹具之间的温差最小。LDM4415兼容ILX光波大功率电流源和温度控制器通过互连电缆，允许高达120A的激光二极管电流为最高功率电导冷却激光二极管棒。通过安装底座上的标准1”间距安装孔，可以安装光学工作台。