The LDM-4405 Laser Diode Mounting Fixture provides a compact, easy to use solution for mounting and temperature controlling TO-Can packaged laser diodes. The fixture accommodates 5.6mm and 9mm TO-Can laser diodes with 3 pins. A wide temperature control range is accomplished by an integrated thermoelectric module which provides for an active control range of +10oC to 85oC with heat loads up to 500 mW. A nitrogen purge system is incorporated to keep the laser free from condensation when operated in a humid environment. The LDM4405 is compatible with ILX Lightwave current sources, temperature controllers, and laser diode controllers through interconnect cabling allowing for quick setup. The fixture is compatible with both ANSI and metric optical table post mounts. The compact profile of the LDM-4405 provides for convenient mounting on an optics table and the unobstructed access to the laser window allows space for aligning collimating optics.

• 包装类型

  3-pin & 4-pin TO-Can

• TE 冷却器

  3.9 A, 3.7 V maximum

• 温度范围

  10 to 85°C

• 温度传感器

  10 kΩ NTC Thermistor

• 最大电流

  500 mA  

• 激光器驱动接头类型

  DB9 Female

• TEC控制器连接端类型

  DB9 Male

• 尺寸

  57.2 x 50.8 x 40.6 mm

• 
  

LDM-4405激光二极管安装夹具提供了一个紧凑的，易于使用的解决方案安装和温度控制到可以封装的激光二极管。该夹具可容纳5.6mm和9mm TO-Can激光二极管3引脚。广泛的温度控制范围是由一个集成的热电模块，提供了一个主动控制范围+10oC到85oC，热负荷高达500mw。加入氮气吹扫系统，使激光在潮湿的环境下工作时不会凝结。LDM4405兼容ILX光波电流源，温度控制器，和激光二极管控制器通过互连电缆允许快速设置。该夹具适用于ANSI和公制光学工作台支架。LDM-4405紧凑的外形提供了方便安装在光学台和畅通的进入激光窗口允许空间对准瞄准光学。