The LDX-36125-24 High Power Laser Diode Driver is a 125A and 24V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36125-24 can output up to 220A at 24V. In addition the LDX3612524 features 4-wire voltage measurement, photodiode measurement, and a trigger in and out.

For automated testing applications in an R&D or production environment, remote operation is easily accomplished through the GPIB/IEEE-488 interface. For virtual instrument programming, LabVIEW® instrument drivers are available free of charge. LabVIEW® instrument drivers can be downloaded from the Literature and Downloads tab on this page.

How are you mounting your laser diode?

• 激光器电流

  125 A

• 连续电流输出

  125 A

• 准连续电流输出

  220 A

• 激光器恒流输出电压

  24 V

• 温度系数

  <50 ppm FS/°C

• 计算机接口

  GPIB

• 电源要求

  200-240 VAC

• 激光器电流分辨率

  10 mA  

• 激光器电流精度

  ±(0.1% of FS +120 mA)

• 噪声/纹波 (rms)

  <60 mA

• 电流输出稳定性（1小时）

  <100 ppm FS

• 占空比

  0.5 to 10 %

• 正向电压精度

  +0.05% of 20mV

• 正向电压分辨率

  10 mV

• 监测电流精度

  +0.1% of FS

• 监测电流范围

  3 to 10000 µA

• 光电二极管反向偏压

  0 to 15 V

• 脉冲宽度

  40 μs to 1 ms

• 脉冲重复频率

  0.1 to 1000 Hz

• 上升/下降时间

  <20 µs

• 显示类型

  5-digit Green LED

• 重量

  18.9 kg  

• 
  

LDX-36125-24大功率激光二极管驱动器是一个125A和24V电流源，提供连续波，连续波，硬脉冲输出和多层次的激光二极管保护。在QCW模式下，LDX36125-24可以在24V下输出220A。此外，LDX3612524特点4线电压测量，光电二极管测量，和触发器内外。

对于研发或生产环境中的自动化测试应用程序，通过GPIB/IEEE-488接口很容易实现远程操作。对虚拟仪器编程,®仪器驱动程序是免费的。虚拟仪器®仪器驱动程序可以从文献下载和下载选项卡页面。