The LDX-36018-35 High Power Laser Diode Driver is an 18A and 35V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36018-35 can output up to 40A at 35V. In addition the LDX3601835 features 4-wire voltage measurement, photodiode measurement, and a trigger in and out.

For automated testing applications in an R&D or production environment, remote operation is easily accomplished through the GPIB/IEEE-488 interface. For virtual instrument programming, LabVIEW® instrument drivers are available free of charge. LabVIEW® instrument drivers can be downloaded from the Literature and Downloads tab on this page.

How are you mounting your laser diode?

• 激光器电流

  18 A

• 连续电流输出

  18 A

• 准连续电流输出

  40 A

• 激光器恒流输出电压

  35 V

• 温度系数

  <50 ppm FS/°C

• 计算机接口

  GPIB

• 电源要求

  100-120 VAC, 200-240 VAC

• 激光器电流分辨率

  10 mA  

• 激光器电流精度

  ±(0.1% of FS +10 mA)

• 噪声/纹波 (rms)

  <10 mA

• 电流输出稳定性（1小时）

  <100 ppm FS

• 占空比

  0.5 to 20 %

• 正向电压精度

  +0.05% of 20mV

• 正向电压分辨率

  10 mV

• 监测电流精度

  +0.1% of FS

• 监测电流范围

  3 to 10000 µA

• 光电二极管反向偏压

  0 to 5 V

• 脉冲宽度

  40 μs to 1 ms

• 脉冲重复频率

  0.1 to 1000 Hz

• 上升/下降时间

  <10 µs

• 显示类型

  5-digit Green LED

• 重量

  11.9 kg  

• 
  

LDX-36018-35大功率激光二极管驱动器是一个18A和35V电流源，提供连续波、连续波和硬脉冲输出与多层次的激光二极管保护。在QCW模式下，LDX36018-35可以在35V下输出40A。此外，LDX3601835具有四线电压测量，光电二极管测量，和触发器内外。

对于研发或生产环境中的自动化测试应用程序，通过GPIB/IEEE-488接口很容易实现远程操作。对虚拟仪器编程,®仪器驱动程序是免费的。虚拟仪器®仪器驱动程序可以从文献下载和下载选项卡页面。