The LQC639-30C CW Laser Diode Module is an economical choice. It includes the diode and collimating optics in a single case. This Fabry-Perot (FP) 639 nm Laser Diode Module with a 30 mW CW circular beam comes in a self contained module. It requires a 5 VDC external power supply. An LPMS-5-110 or LPMS-5-220 Series Power Supply (not included) must be used with this LD module to meet CDRH requirements by providing an interlock input, key enable switch, delayed start-up, and laser active indicator. Warranty is not applicable when a custom power supply is used to drive the module.

• 类型

  CW Laser Diode

• 中心波长

  639 nm  

• 中心波长公差

  ±10 nm

• 输出功率

  30 mW  

• 功率稳定性

  <1% (8 hr.)

• 光束直径 (1/e2)

  1.56 x 1.56 mm

• 光束发散角（全角）

  <1.2 mrad

• 最大工作电流

  3000 mA  

• 尺寸

  Ø38.1 x 157.5 mm

• 噪声

  005

• 应用

  Spectroscopy, Interferometry, Machine Vision, Marking, Flow Cytometry, Tissue Fluorescence

• 线宽

  2 nm

• 电源要求

  4.8 to 12 VDC

• 工作温度

  0 to 40°C

LQC639-30C连续波激光二极管模块是一个经济的选择。它包括二极管和准直光学在单一情况下。该Fabry-Perot (FP) 639nm激光二极管模块与30mw连续波循环光束在一个独立的模块。它需要一个5vdc外部电源。这个LD模块必须使用LPMS-5-110或LPMS-5-220系列电源(不包括在内)，通过提供联锁输入、键启动开关、延迟启动和激光有源指示器来满足CDRH的要求。当使用自定义电源驱动模块时，保修不适用。