The NOA-1375S UV-curing adhesive is clear liquid adhesive that will cure when exposed long wavelength ultraviolet light. NOA-1375S is recommended for bonding for glass to glass. Adhesion is also good to cellulose acetate butyrate. It is cured by ultraviolet light between 315 to 395 nm. Full cure requires 6 Joules/cm 2 . The adhesive exhibits oxygen inhibition when used as a coating. To overcome this the adhesive must be cured under an inert atmosphere, such as nitrogen.

Keep NOA 1375S in a cool(5-22 ° C) dark place. If refrigerated, allow the adhesive to come to room temperature before using. Available in a 6 gram syringe.

• 类型

  Epoxy

• 工作温度

  -15 to 90°C

• 玻璃粘合性

  Excellent

• 金属粘附

  Good

• 塑料粘附

  Fair

• 推荐使用

  Low viscosity adhesive with a refractive index of 1.375 for  bonding glass or plastic.

• 折射率（固化后）

  1.375  

• 粘度

  45 - 60 cps

NOA-1375S uv固化胶粘剂是透明液体胶粘剂，在长波长紫外光照射下可固化。建议将noa -1375 5s用于玻璃与玻璃的结合。对醋酸丁酸纤维素有良好的附着力。在315到395纳米的紫外光照射下固化。完全固化需要6焦耳/厘米2。这种胶粘剂用作涂层时表现出氧抑制作用。要克服这一点，胶粘剂必须在惰性气体(如氮气)下固化。

让诺亚1375年代在阴凉(5-22°C)黑暗的地方。如果要冷藏，在使用前让胶粘剂达到室温。6克注射器。