The F-UVE-63 (NOA 63) UV-curing liquid polymer adhesive is suited for fast, high-precision bonding of optics. The transmission of a 0.25 mm thick adhesive layer is greater than 98% from 400–2000 nm.
The F-UVE-63 adhesive cures thick, and can be pre-cured in just seconds and fully-cured in minutes with a 350–380 nm, 100 mW UV mercury spot lamp. Available in 1 oz. (30 ml) applicator bottles.

• 类型

  Epoxy

• 工作温度

  -15°C to 60°C

• 玻璃粘合性

  Good

• 金属粘附

  Good

• 塑料粘附

  Fair

• 推荐使用

  Cures well in thick sections; transmits 350–2000 nm

• 折射率（固化后）

  1.56  

• 粘度

  2500 cps

• 
  

F-UVE-63 (NOA 63) uv固化液体聚合物胶粘剂适用于光学器件的快速、高精度粘接。0.25 mm厚的胶层从400-2000 nm的透射率大于98%。

F-UVE-63胶粘剂固化较厚，使用350-380 nm, 100mw UV汞斑灯，只需几秒钟即可预固化，完全固化只需几分钟。适用于1盎司(30毫升)的药瓶。