The F-UVE-68 (NOA 68) UV-curing liquid polymer adhesive is suited for fast, high-precision bonding of optics. The transmission of a 0.25 mm thick adhesive layer is greater than 98% from 400–2000 nm.
The F-UVE-68 adhesive is flexible for Polycarbonate, CAB or Acrylic bonding applications, and can be pre-cured in just seconds and fully-cured in minutes with a 350–380 nm, 100 mW UV mercury spot lamp. Available in 1 oz. (30 ml) applicator bottles.

• 类型

  Epoxy

• 工作温度

  -80°C to 90°C(after 1 week of aging)

• 玻璃粘合性

  Excellent

• 金属粘附

  Good

• 塑料粘附

  Very Good

• 推荐使用

  Flexible; good for polycarbonate CAB or acrylic

• 折射率（固化后）

  1.54  

• 粘度

  5000 cps

• F-UVE-68 (NOA 68) uv固化液体聚合物胶粘剂适用于光学器件的快速、高精度粘接。0.25 mm厚的胶层从400-2000 nm的透射率大于98%。

• F-UVE-68型胶粘剂适用于聚碳酸酯、CAB或丙烯酸的粘接应用，可在几秒钟内预固化，在几分钟内完全固化，使用350-380 nm, 100mw UV汞斑灯即可。适用于1盎司(30毫升)的药瓶。