The F-ILP-1-F-SP-FA Fiber Optic In-Line Polarizer is designed for 1310 nm fiber optic networks and measurement applications, which include polarization analyzing, polarization monitoring and control, Signal-to-Noise Ratio (SNR) monitoring, Polarization Mode Dispersion (PMD) monitoring, spectrum filtering and control, Polarization Extinction Ratio (PER) improvement, fiber laser mode-locking and polarization interferometry. When combined with Newport's F-POL Series Polarization Controllers it can also function as a variable fiber optic attenuator. The F-ILP Series is based on integrating a high PER micro-polarizer in a rugged stainless steel package for high optical performance and stability. These compact devices offer low insertion loss, low back reflection and high extinction ratio. This version has a 1 m Corning SMF-28 fiber input with a FC/APC connector and a 1 m Fujikura PM Panda fiber output with 900 μm loose tube and a FC/APC connector.

• 类型

  In-line Polarizer

• 光纤接头

  FC/APC

• 光纤类型

  SM: Corning SMF-28, PM: Fujikura PM Panda fiber

• 消光比

  30 dB (typical)

• 波长范围

  1310 nm

• 典型插入损耗

  0.3 dB

• 最大插入损耗

  0.5 dB

• 最大光功率

  300.0

• 尺寸

  ø5.5 x 32 mm

• 中心波长

  1310.0

• 中心波长公差

  ±50 nm

• 工作温度

  0 to 70°C

• 回波损耗

  55 dB

• 
  

F-ILP-1-F-SP-FA光纤在线偏振器设计用于1310 nm光纤网络和测量应用，包括偏振分析、偏振监视和控制、信噪比(SNR)监视、偏振模色散(PMD)监视、频谱滤波和控制、偏振消光比(PER)改进、光纤激光锁模和偏振干涉测量。当与新港的F-POL系列偏振控制器结合时，它还可以作为可变光纤衰减器。F-ILP系列是在坚固的不锈钢封装中集成了一个高单微偏振器，以获得高光学性能和稳定性。这些紧凑的装置提供低插入损耗，低反射和高消光比。这个版本有一个1米康宁SMF-28光纤连接器输入与FC / APC和1 m Fujikura点熊猫光纤输出900μm松管和FC / APC连接器。

The F-ILP-1-F-SP-FA Fiber Optic In-Line Polarizer is designed for 1310 nm fiber optic networks and measurement applications, which include polarization analyzing, polarization monitoring and control, Signal-to-Noise Ratio (SNR) monitoring, Polarization Mode Dispersion (PMD) monitoring, spectrum filtering and control, Polarization Extinction Ratio (PER) improvement, fiber laser mode-locking and polarization interferometry. When combined with Newport's F-POL Series Polarization Controllers it can also function as a variable fiber optic attenuator. The F-ILP Series is based on integrating a high PER micro-polarizer in a rugged stainless steel package for high optical performance and stability. These compact devices offer low insertion loss, low back reflection and high extinction ratio. This version has a 1 m Corning SMF-28 fiber input with a FC/APC connector and a 1 m Fujikura PM Panda fiber output with 900 μm loose tube and a FC/APC connector.