The F-MM105 Fibercore Multi-Mode Pump Fiber is a pure silica core/fluorinated silica-clad Multi-Mode (MM) fiber with a 105�m core and a 125�m cladding. The relatively large core diameter makes this fiber ideal for pigtailing high power, 940nm multi-mode diode lasers used to pump Passive Optical Network (PON)/FTTx amplifiers. This core diameter makes the fiber fully compatible with Fibercore’s range of Cladding-Pump fiber products, minimizing optical connection losses and maximizing optical conversion efficiency.

Fibers within the Fibercore cladding pump range include:

� Dual-Clad Erbium/Ytterbium Doped Fiber (F-CP1500Y): All-silica Er-Yb Co-doped fiber for high power PON/FTTx amplifiers

� Dual-Clad Ytterbium Doped Fiber (F-CP1100): All-silica Yb doped fiber for high reliability fiber lasers

� Passive Dual-Clad Fiber (SMM900): Cladding-Pump component fiber for Isolating Wavelength Division Multiplexer (CP-IWDM) fabrication

These fibers can be seen working together in the diagram below, of a typical high power amplifier.

• 折射率分布

  Step

• 光纤类型

  Multimode

• 纤芯直径

  100 - 104 µm

• 包层直径

  125 ±1 µm

• 镀膜直径

  245 ±15 µm

• 电缆直径

  2.5 mm

• 工作波长

  ≥400 nm

• 缓冲涂层材料

  Dual Acrylate

• 数值孔径

  0.24 - 0.28

• 验证试验

  100 kpsi  

的F-MM105 Fibercore多模泵纤维是一个纯硅芯/氟化silica-clad多模(毫米)纤维与核心和125�105�m m包层。相对较大的芯径使该光纤成为理想的生染大功率，940nm多模二极管激光器用于泵浦无源光网络(PON)/FTTx放大器。这种芯径使光纤完全兼容纤芯的包壳泵光纤产品范围，最大限度地减少光连接损耗，最大限度地提高光转换效率。

纤芯包层泵浦范围内的纤维包括:

�Dual-Clad /铒镱掺杂纤维(F-CP1500Y):全石英Er-Yb Co-doped纤维对其高功率/ FTTx放大器

�Dual-Clad掺镱光纤(F-CP1100):全石英掺Yb光纤对光纤激光器的可靠性高

�被动Dual-Clad纤维(SMM900):Cladding-Pump组件光纤隔离波分多路复用器(CP-IWDM)制造

这些纤维可以看到一起工作在下面的图表，一个典型的高功率放大器。