The F-SPV-C-2FCA Bow Tie PM (Polarization Maintaining) Fiber Patch cord uses F-SFP fiber for 633 nm operation. This patch cord is 1 meter long with FC/UPC connectors at both ends. The slow axis is aligned to the connector key within +/- 1°.

The F-SPV Polarization Maintaining Fiber uses Fibercore's Bow-tie polarization maintaining (PM) fiber technology. This highly birefringent (HiBi) fiber has a beat-length of less than 2 mm. The beat-length, the length over which the fiber polarization rotates through 360°, is one of the fundamental performance measures: the shorter the beat-length, the better the polarization-preserving properties of the fiber. This Polarization Maintaining fiber has a 125 μm cladding, 245 μm coating, a 3.2 μm Mode Field Diameter, and a 0.14 to 0.18 NA.

• 折射率分布

  Step

• 光纤类型

  Polarization Maintaining

• 模场直径，标称

  3.2 µm

• 包层直径

  125 ±1 µm

• 镀膜直径

  245 ±12 µm

• 电缆直径

  2.5 mm

• 光纤接头

  FC/APC

• 光纤长度

  2 m

• 工作波长

  633-688 nm

• 截止波长

  500-600 nm

• 缓冲涂层材料

  Dual Acrylate

• 最大衰减

  ≤15 dB/km

• 数值孔径

  0.14-0.18

• 验证试验

  100 kpsi  

F-SPV-C-2FCA蝶形领结PM(保偏)光纤贴片线采用F-SFP光纤进行633 nm操作。这个贴片线长1米，两端有FC/UPC连接器。慢轴对齐到连接器关键在+ / - 1°。

F-SPV保偏光纤采用纤芯的蝴蝶结保偏光纤技术。这种高度双折射(HiBi)纤维的拍子长度小于2毫米。beat-length,长度的光纤偏振旋转360°,基本性能的措施:beat-length越短,越保偏光纤的属性。这偏振保持光纤有一个125μm包层,245μm涂层,μm模场直径3.2,0.14到0.18 NA。