The F-HB1500P Polyimide Coated Polarization Maintaining Fiber uses Fibercore's Bow-Tie polarization maintaining (PM) fiber technology. This highly birefringent (HiBi) fiber, is optimized for operation between 1550 - 1650 nm and has a beat-length of less than 2 mm. The beat-length, the length over which the fiber polarization rotates through 360°, is one of the fundamental performance measures: the shorter the beat-length, the better the polarization-preserving properties of the fiber. This Polarization Maintaining fiber has a 125 μm cladding, 245 μm coating, a 8.1 μm Mode Field Diameter, and a 0.14 to 0.18 NA. Standard pricing is per meter.


Polyimide Coated PM Fiber withstands temperatures as high as 400°C short-term and 300°C continuous. It is ideal for medical sensing application where fiber must be sterilized at high temperature, or withstand curing temperatures of the high performance laminates.

• 折射率分布

  Step

• 光纤类型

  Polarization Maintaining

• 模场直径，标称

  7.0 - 9.2 @1550 nm µm

• 包层直径

  125 ±3 µm

• 镀膜直径

  145 ±7 µm

• 电缆直径

  2.5 mm

• 工作波长

  1550 - 1650 nm

• 截止波长

  1230 - 1520 nm

• 缓冲涂层材料

  Polyimide

• 最大衰减

  2 dB/km @1550 nm

• 数值孔径

  0.14 - 0.18

• 验证试验

  100 kpsi  

F-HB1500P聚酰亚胺涂层保偏光纤采用纤芯的蝴蝶结保偏(PM)光纤技术。这种高度双折射(HiBi)纤维，在1550 - 1650纳米之间进行优化，其长度小于2毫米。beat-length,长度的光纤偏振旋转360°,基本性能的措施:beat-length越短,越保偏光纤的属性。这偏振保持光纤有一个125μm包层,245μm涂层,μm模场直径8.1,0.14到0.18 NA。标准价格是每米。

聚酰亚胺涂点纤维经受温度高达400°C短期和300°C连续。它是理想的医疗传感应用，纤维必须在高温消毒，或耐受固化温度的高性能层压板。