The F-SA-C-5FC Singlemode Fiber Patch cord has a 5 meter length and has a FC/UPC connector at one end and bare fiber at the other end. It uses F-SA-C Single-Mode Fiber that is all-glass and supports single-mode light propagation for a 488/514 nm operating wavelength. This low attenuation, step-index fiber has a uniform core refractive index and a matched-clad profile.

• 光纤类型

  Singlemode

• 光纤护套

  Yes

• 模场直径，标称

  2.8 - 4.1 @488 nm µm

• 纤芯直径

  3.4 µm

• 包层直径

  125 ±1 µm

• 镀膜直径

  245 ±15 µm

• 电缆直径

  2.5 mm

• 光纤接头

  FC/UPC

• 光纤长度

  5 m

• 工作波长

  488/514 nm

• 截止波长

  350-450 nm

• 缓冲涂层材料

  Dual Acrylate

• 数值孔径

  0.10-0.14

• 验证试验

  100 kpsi  

• 
  

F-SA-C-5FC单模光纤布线长度为5米，一端为FC/UPC连接器，另一端为裸光纤。它使用全玻璃的F-SA-C单模光纤，支持单模光传播，波长为488/514纳米。这种低衰减，阶梯折射率光纤具有统一的核心折射率和匹配的包层轮廓。

The F-SA-C-5FC Singlemode Fiber Patch cord has a 5 meter length and has a FC/UPC connector at one end and bare fiber at the other end. It uses F-SA-C Single-Mode Fiber that is all-glass and supports single-mode light propagation for a 488/514 nm operating wavelength. This low attenuation, step-index fiber has a uniform core refractive index and a matched-clad profile.