The F-SBB bend insensitive, single mode sensor grade fiber has an 820 nm cutoff wavelength and features a high NA of 0.16. It is suitable for tightly wound fiber spools for a variety of sensing applications. At 1310 nm, for example, the maximum bend induced attenuation, due to 100 fiber turns on a 10 mm mandrel, is only 0.05 dB! 80 μm cladding diameter with a 4.1 μm Mode Field Diameter, this fiber is commonly used in fiber optic gyroscope assemblies or in optical fiber payout systems. Standard pricing is per meter.

• 折射率分布

  Step

• 光纤类型

  Singlemode

• 模场直径，标称

  4.1 @820 nm µm

• 纤芯直径

  3.7 µm

• 包层直径

  80 ±2 µm

• 镀膜直径

  135 ±5 µm

• 电缆直径

  2.5 mm

• 工作波长

  820 nm

• 截止波长

  730 - 810 nm

• 缓冲涂层材料

  Dual Acrylate

• 纤芯同心度

  <1.0 µm

• 最大衰减

  5 dB/km @820 nm

• 数值孔径

  0.16

• 验证试验

  100 kpsi  

F-SBB不敏感弯折，单模传感器级光纤的截止波长为820 nm, NA值为0.16。它适用于各种传感应用的紧密缠绕纤维线轴。例如，在1310nm时，由于100根光纤在10mm心轴上转动，导致的最大弯曲衰减只有0.05 dB!80年μm包层直径4.1μm模场直径、纤维是常用的光纤陀螺仪组件或光纤支付系统。标准价格是每米。