The Component-Style Fiber Optic Prism Switches offered by Newport are switches that have high durability greater than 10 million cycles) and low insertion loss. The SPSN-9-12 is a single-mode 1 x 2 switch using a moving prism between fixed collimator pairs, which allows bi-directional operation independent of data rate and signal format. 9/125 µm, 1 m long, jacketed bare fiber pigtails are standard. In addition, optional ST, FC and SC fiber connector termination options can be ordered.
The 1x2 single-mode switch is a two position devices that enable channel selection. This non-latching model requires a 5V DC switching voltage. Applications include fiber and component testing and optical signal routing.
类型
1x2 Fiber-optic Switch
光纤类型
Singlemode
光纤接头
Bare Fiber
工作波长
1290-1570 nm
最大插入损耗
1.0 dB
典型插入损耗
0.6 dB
工作温度
-20 to 65°C
工作湿度
60°C / 90% RH / 5 days
隔离/串扰
-80 dB
最大背向反射
-55 dB
耐用性
>10 million cycles
新港提供的组件式光纤棱镜开关是耐用度超过1000万圈的开关,插入损耗低。SPSN-9-12是一种单模1 x 2开关,使用固定准直对之间的移动棱镜,允许不受数据速率和信号格式影响的双向操作。9/125µm,1米长,夹套裸露的纤维辫子是标准。此外,可选的ST, FC和SC光纤连接器终端选项可以订购。
1x2单模开关是一个支持通道选择的两个位置设备。这种非闭锁模式需要5V直流开关电压。应用包括光纤和组件测试和光信号路由。