The F-H5-VIS-FC Collimator is designed specifically for single-mode and polarization maintaining (PM) fiber applications in the 400 to 600 nm range, which need to generate a clean Gaussian Beam at any distance. It is designed for long distance projection applications such as free space communications and alignment of very large objects. It is also ideal for interferometry, confocal microscopy and applications requiring low wavefront error. The clear aperture is 6 mm and the collimators is offered with a FC/PC receptacle to accept any single-mode or PM fiber. The output is user adjustable to vary the beam for best collimation at the wavelength and the distance of interest. The high precision optics deliver a wavefront error <λ/10 and a full beam divergence of <0.5 mrad. The F-H5 Series may be conveniently mounted in Newport's MH-2P Mount with A-75-50 adapter.

• 类型

  Adjustable Collimator

• 光纤类型

  Single Mode

• 光纤接头

  FC/PC

• 工作波长

  400-600 nm

• 最大插入损耗

  0.25 dB

• 工作湿度

  85%

• 光束直径 (1/e2)

  2.0 mm

• 通光孔径

  6 mm

• 偏振相关损耗，最大值

  0.03 @ 1550 nm

• 偏振相关损耗，典型值

  0.01 @ 1550 nm

• 
  

F-H5-VIS-FC准直仪是专为在400到600纳米范围内的单模和偏振保持(PM)光纤应用而设计的，需要在任何距离产生一个干净的高斯光束。它是设计用于长距离投影应用，如自由空间通信和非常大的对象对齐。它也很理想的干涉测量，共焦显微镜和应用需要低波前误差。光圈为6mm，准直器配置FC/PC插座，可接受任何单模或PM光纤。该输出是用户可调的，以改变波束的最佳准直在波长和感兴趣的距离。高精度光学波前误差<λ/ 10和全面光束发散度< 0.5 mrad。F-H5系列可以方便地安装在新港的MH-2P型安装上，带有A-75-50适配器。