The M-BSD-2A Metric Beam Steerer lets you easily set your laser beam height and precisely control the azimuth and elevation angles of the beam leaving the periscope device. Our beam steerer has two fully adjustable mirror mounts, allowing entering beams to be non-parallel to the table surface. Adjust the bottom mirror to center the beam on the top mirror, then adjust the top mirror to steer the beam to the desired location. ULTIMA® Mirror Mounts with 45° mirror holders for 25.4 mm diameter mirrors allow your beam to be precisely positioned. Sliding clamps on a solid stainless steel post, 203.2 mm high, when assembled, provide height adjustment with high stability. If a taller beam steerer is required, simply attach an extension post (see Pedestal Post System). The beam steerer is securely mounted anywhere on an optical table using the stainless steel clamping fork. Two 25.4 mm diameter mirrors must be ordered separately. Metric version.


M-BSD-2A米制波束导向器可以方便地设置激光束高度，精确地控制波束离开潜望镜装置的方位和仰角。我们的梁舵机有两个完全可调的镜面支架，允许进入梁不平行于台面。调整底部的镜子，使光束集中在顶部的镜子上，然后调整顶部的镜子，以引导光束到所需的位置。天涯®镜支架与45°镜子持有者为25.4毫米直径的镜子让你梁精确定位。不锈钢支柱上的滑动夹具，高203.2 mm，装配时高度可调，稳定性高。如果需要更高的横梁导向器，只需附加一个加长柱(参见基座柱系统)。梁舵机是安全安装在任何地方的光学表使用不锈钢夹持叉。两个直径25.4 mm的镜子必须分开订购。标准的版本。