The VB-1 3 inch V-Block is designed to hold larger objects. Each block comes with one clamping arm that can be removed and repositioned by accessing one of the threaded holes along the base. Additional clamping arms are sold separately.These two blocks are designed to offer a variety of mounting options. Accessing the counterbored 1/4-20 (M6) holes, they can be attached directly to tables, tip/tilt stages, translation stages or post mounted. There are also holes along the side of the base for direct mounting to 340-RC and 370-RC Rod Clamps.

• 类型

  76.2 mm V-Block Mount

• 直径

  8.9-50.8 mm

• 调节类型

  Fixed

• 使用

  Table or Stage Mounting

• 
  

VB-1 3英寸的v形块被设计用来容纳更大的物体。每个块都带有一个夹紧臂，可以通过访问底座上的螺纹孔之一来拆卸和重新定位。额外的夹紧武器单独出售。这两个模块的设计提供了多种安装选项。进入埋头钻1/4-20 (M6)孔，它们可以直接连接到工作台、尖端/倾斜工作台、平移工作台或柱架上。在底座侧面也有孔，用于直接安装到340-RC和370-RC杆夹。