The AG-M100L 1 inch (25.4 mm) Agilis Optical Mount features Newport’s new, proprietary, non-resonant piezo direct motors. These highly integrated motors are directly coupled to the moving platen. When idle, spring forces lock the mirror’s position for true set and forget long term stability. Agilis mounts have a faster adjustment speed than alternative screw driven designs. In contrast to ultrasonic motors, the Agilis non-resonant motor concept makes small adjustments more predictable with its 50 nm incremental motion capability, ideal for ultra-sensitive optical alignments.
For repeatable absolute positioning, the AG-M100L features precision electrical limit switches. These switches act not only as safety devices, they also allow repeatable absolute positioning without the need for expensive encoder feedback. This is accomplished by measuring the average step size from the left to the right travel limits and vice versa. Under constant conditions, the step size is fairly repeatable.
Use with either the Agilis AG-UC2 handheld, AG-UC8 or AG-UC8PC controllers.

• 类型

  Center Mount

• 镜片直径

  25.4 mm

• 电动轴

  2  

• 角度范围

  ±2°

• 螺纹类型

  8-32 (M4) CLR

• 电缆长度

  1.2 m  

• 端口类型

  4-Pin Mini-DIN

• 机制

  Piezo Motor

• 工作温度

  10 to 35°C

• 重量

  85 g  

• 精度

  0.05°

• 最大速度

  0.75°/s

• 灵敏度

  1 µrad

• 
  

agl - m100l 1英寸(25.4毫米)Agilis光学安装具有新港的新型专利的非共振压电直动机。这些高度集成的电动机直接耦合到移动平台上。当空闲时，弹簧力锁住镜子的位置，以便真正设置，忘记了长期的稳定性。Agilis支架具有比其他螺杆驱动设计更快的调整速度。与超声波电机不同，Agilis非共振电机的概念使小的调整更容易预测其50纳米增量运动能力，理想的超灵敏光学校准。对于可重复的绝对定位，AG-M100L具有精确的电气限位开关。这些开关不仅作为安全装置，它们还允许可重复的绝对定位，而不需要昂贵的编码器反馈。这是通过测量从左到右的平均步长来实现的，反之亦然。在恒定条件下，步长是相当可重复的。与Agilis AG-UC2手持，AG-UC8或AG-UC8PC控制器一起使用。