The NPO140SG Objective Nano-Focusing Objective Stage is a high-speed, piezoelectric-driven device that provides fast focusing and scanning over a 140 μm travel range. It is compatible with most microscopes and objective lenses. Typical applications include surface profilometry, high-resolution imaging, auto-focusing, scanning interferometry, and confocal microscopy. NPO stages feature highly reliable, multi-layer, low-voltage, piezoelectric transducer (PZT) stacks, which are optimized for high-duty cycle operations. Image shifts and tilt are minimized by an FEA-modeled and precision EDM-cut parallelogram, solid-state flexure that ensures perfectly straight motion. The sophisticated guide also provides the highest possible stiffness for superior focus stability, higher frequency auto-focusing, shorter settling times and faster scans. NPO stages are maintenance-free and are not subject to wear. This closed-loop version features a high resolution strain-gauge position sensor for highly accurate and repeatable motion. The position feedback compensates for actuator creep. For highest position stability and highest temperature-insensitive performance, the sensors are assembled in a full Wheatstone bridge design. The closed-loop devices can be operated in open or closed-loop control. The NPO NanoFocusing stages mount between the turret and the microscope objective and add only 11.5 mm to the optical path length. All models can be used for standard and inverted microscopes. The standard thread size is W0.8 x 1/36 inch and is compatible with all Newport objective lenses.
Use with the NPC3SG Nanopositioning Amplifier.


NPO140SG目标Nano-Focusing客观阶段是一个高速、压电驱动装置,提供了快速聚焦和扫描140μm旅行。适用于大多数显微镜和物镜。典型的应用包括表面轮廓测量、高分辨率成像、自动聚焦、扫描干涉测量和共聚焦显微镜。NPO级具有高可靠性，多层，低压，压电换能器(PZT)栈，这是为高占空比操作优化。图像移动和倾斜被有限元建模和精确的电火花切割平行四边形最小化，固态弯曲确保了完美的直线运动。复杂的指南还提供了最高的刚度为卓越的焦点稳定性，更高的频率自动聚焦，更短的解决时间和更快的扫描。NPO级是免维护的，不受磨损。该闭环版本具有高分辨率应变计位置传感器，具有高精度和可重复性。位置反馈补偿执行机构蠕变。为了获得最高的位置稳定性和最高的温度不敏感性能，传感器被组装在一个完整的惠斯通桥的设计。闭环装置可进行开环控制或闭环控制。NPO纳米ofocusing级安装在炮塔和显微镜物镜之间，只增加11.5毫米的光路径长度。所有模型均可用于标准显微镜和倒置显微镜。标准螺纹尺寸为W0.8 x 1/36英寸，与所有纽波特物镜兼容。使用与NPC3SG纳米放大。