The U50-PL ULTIMA Platform Mount offers unsurpassed functionality. Thick front and rear plates and optimized, stiff springs improve the long-term stability and provide greater protection against vibrations. Hard carbide pads enable smooth, repeatable motion. A large array of optical mounting accessories is available for these mounts making ULTIMA a basic building block for many optical systems. When this platform version is used with the optional adaptor UPA-PA.5 it can be converted to a horizontal tip/tilt or tip/tilt and translation post-mounted platform for prisms, cube beamsplitters, and other components. When used with the optional Mirror Holder UPA.5 this mount provides a stable mounting platform for 0.5 inch (12.7 mm) diameter mirrors. It has integral, 80 TPI hex head adjustment screws with patented locking mechanisms. The optional KD.37 knobs have two slots for an Allen wrench to increase the adjustment sensitivity. Three actuators allows ±5° tip/tilt and translation. Translation of the optic is accomplished by turning all three actuators. Convenient clearance mounting holes on each of two sides are compatible with either 8-32 or M4 screws providing quicker, more precise, and more secure mounting. ULTIMA mounts can be mounted to posts for adjustable height or pedestal posts for a stable fixed height.


U50-PL ULTIMA平台挂载提供了无与伦比的功能。前、后厚板和经过优化的刚性弹簧，提高了长期稳定性，并提供更大的防震保护。硬质合金垫使运动平滑、可重复。大量的光学安装附件可用于这些安装，使ULTIMA成为许多光学系统的基本构件。当此平台版本与可选适配器UPA-PA一起使用时。5 .可转换为水平端/倾斜或端/倾斜平移后置平台，用于棱镜、立方体波束分离器等组件。当与可选的镜架UPA.5一起使用时，这种安装为0.5英寸(12.7 mm)直径的镜子提供了一个稳定的安装平台。它有完整的，80 TPI六角头调整螺钉与专利锁定机制。可选的KD.37旋钮有两个槽内六角扳手，以增加调整灵敏度。三个驱动器允许±5°提示/倾斜和翻译。光学的平移是通过转动三个执行机构来完成的。方便的间隙安装孔在双方都是兼容的8-32或M4螺丝提供更快，更精确，更安全的安装。ULTIMA支架可以安装在高度可调的柱子上，也可以安装在高度稳定的基座上。