The U100-P2K-NL ULTIMA Platform Mount offers unsurpassed functionality. Thick front and rear plates and optimized, stiff springs improve the long-term stability and provide greater protection against vibrations. The patented clear quadrant design exposes the edge of the optic, allowing beams to pass close to the edge of a mounted optic. The actuators can be quickly changed to accommodate a broad selection of adjustment screws, micrometers, and motorized actuators. Hard carbide pads enable smooth, repeatable motion. A large array of optical mounting accessories is available for these mounts making ULTIMA a basic building block for many optical systems. When this platform version is used with the optional adaptor UPA-PA1 it can be converted to a horizontal tip/tilt or tip/tilt and translation post-mounted platform for prisms, cube beamsplitters, and other components. When used with the optional Mirror Holder UPA1 this mount provides a stable mounting platform for 1 inch (25.4 mm) diameter mirrors. It has integral, 100 TPI hex head adjustment screws. The included KD.37 knobs have two slots for an Allen wrench to increase the adjustment sensitivity. Two actuators allows ±7° tip/tilt. Convenient clearance mounting holes on each of two sides are compatible with either 8-32 or M4 screws providing quicker, more precise, and more secure mounting. ULTIMA mounts can be mounted to posts for adjustable height or pedestal posts for a stable fixed height.


U100-P2K-NL ULTIMA平台提供了无与伦比的功能。前、后厚板和经过优化的刚性弹簧，提高了长期稳定性，并提供更大的防震保护。专利的透明象限设计暴露了光学边缘，允许光束通过接近安装的光学边缘。执行机构可以迅速改变，以适应广泛的选择调整螺丝，千分尺，和电动执行机构。硬质合金垫使运动平滑、可重复。大量的光学安装附件可用于这些安装，使ULTIMA成为许多光学系统的基本构件。当此平台版本与可选适配器UPA-PA1一起使用时，可以将其转换为用于棱镜、立方体波束分离器和其他组件的水平端/倾斜或端/倾斜和转换后安装平台。当与可选的镜架UPA1一起使用时，该支架为直径为1英寸(25.4 mm)的镜子提供了一个稳定的安装平台。它有完整的，100 TPI六角头调整螺钉。所包括的KD.37旋钮有两个槽，用于一个内六角扳手，以增加调整灵敏度。两个驱动器允许±7°提示/倾斜。方便的间隙安装孔在双方都是兼容的8-32或M4螺丝提供更快，更精确，更安全的安装。ULTIMA支架可以安装在高度可调的柱子上，也可以安装在高度稳定的基座上。