The U100-P ULTIMA Platform Mount offers unsurpassed functionality. Thick front and rear plates and optimized, stiff springs improve the long-term stability and provide greater protection against vibrations. The actuators can be quickly changed to accommodate a broad selection of adjustment screws, micrometers, and motorized actuators. Hard carbide pads enable smooth, repeatable motion. A large array of optical mounting accessories is available for these mounts making ULTIMA a basic building block for many optical systems. When this platform version is used with the optional adaptor UPA-PA1 it can be converted to a horizontal tip/tilt or tip/tilt and translation post-mounted platform for prisms, cube beamsplitters, and other components. When used with the optional Mirror Holder UPA1 this mount provides a stable mounting platform for 1 inch (25.4 mm) diameter mirrors. This version does not include actuators. Convenient clearance mounting holes on each of two sides are compatible with either 8-32 or M4 screws providing quicker, more precise, and more secure mounting. ULTIMA mounts can be mounted to posts for adjustable height or pedestal posts for a stable fixed height.


U100-P ULTIMA平台安装提供了无与伦比的功能。前、后厚板和经过优化的刚性弹簧，提高了长期稳定性，并提供更大的防震保护。执行机构可以迅速改变，以适应广泛的选择调整螺丝，千分尺，和电动执行机构。硬质合金垫使运动平滑、可重复。大量的光学安装附件可用于这些安装，使ULTIMA成为许多光学系统的基本构件。当此平台版本与可选适配器UPA-PA1一起使用时，可以将其转换为用于棱镜、立方体波束分离器和其他组件的水平端/倾斜或端/倾斜和转换后安装平台。当与可选的镜架UPA1一起使用时，该支架为直径为1英寸(25.4 mm)的镜子提供了一个稳定的安装平台。这个版本不包括执行机构。方便的间隙安装孔在双方都是兼容的8-32或M4螺丝提供更快，更精确，更安全的安装。ULTIMA支架可以安装在高度可调的柱子上，也可以安装在高度稳定的基座上。