The SU100W-F2H-127 Low-Distortion Suprema Mirror Mount offes the combination of low optical distortion and outstanding long-term stability. Each mount has a unique low-stress faceplate to mount the optic. This mounting feature reduces wave front distortion by over 70% compared to standard set screw retained optics. All Suprema mirror mounts have stainless steel bodies and precision carbide kinematic pads to ensure low thermal drift making them ideal for applications in laser instruments and research. Through our patented process we create cost-effective pressed and sintered powdered stainless steel mounts with performance comparable to that of wrought stainless steel. Newport's SU100W design has been optimized utilizing our broad experience in opto-mechanics, vibration damping and isolation, optics, and material science. Through comprehensive design, finite element analysis, and rigorous testing, we have achieved performance previously attained only through high cost, custom stainless steel mounts. 1 inch (25.4 mm) diameter optics are front loaded SU100W mounts have superior adjustability and feel. Polished and lapped carbide pads enable smooth, repeatable motion. This two-actuator configuration with 127 TPI locking hex key adjustment screws has tip and tilt adjustability over a range of +/- 7 degrees. Convenient 8-32 (M4) counterbored clearance holes provide quick, precise, secure and stable mounting. SUPREMA mounts are compatible with standard post and post holder systems for adjustable height and pedestal posts for a stable fixed height.

u100w - f2h -127低畸变至上反射镜的安装是低畸变和优异的长期稳定性的结合。每个安装有一个独特的低应力面板安装光学。与标准固定螺钉固定光学相比，这种安装特性可以减少70%以上的波前畸变。所有Suprema镜面支架均采用不锈钢机身和精密碳化物运动垫，以确保低热漂移，是激光仪器和研究领域的理想应用。通过我们的专利工艺，我们创造了性价比高的压烧结不锈钢粉末支架，其性能可与锻造不锈钢媲美。新港的SU100W设计充分利用了我们在光学力学、减振与隔离、光学和材料科学方面的广泛经验进行了优化。通过全面的设计、有限元分析和严格的测试，我们取得了以往只有通过高成本的定制不锈钢支架才能达到的性能。1英寸(25.4 mm)直径的光学元件是前置的SU100W支架，具有优越的可调性和手感。抛光和研磨碳化物垫，使平滑，可重复的运动。该双执行机构配置127 TPI锁定六角键调整螺钉具有尖端和倾斜可调范围+/- 7度。方便的8-32 (M4)埋头间隙孔提供快速、精确、安全、稳定的安装。适用于可调高度的标准立柱和立柱架系统，适用于固定高度的固定支座立柱。