The 605-4 Gimbal Mount provides ultra-stable positioning of optics up to 4 inch (101.6 mm) in diameter. The pivot axes rotate 360 °, and hex-head setscrews provide coarse-adjustment lock-down for each axis. Standard AJS Fine Adjustment Screws provide ±5 ° of high-resolution fine adjustment and have tamper-proof lock screws. The pivot axes employ wobble-free, pre-loaded radial ball bearings and are spring-loaded to eliminate backlash. Adaptors provide optic registration on the gimbal axes. These mounts incorporate an especially convenient kinematic mounting design to accommodate optics of various thicknesses. The spring-loaded retaining clips have finger grip handles. Three polished steel balls kinematically register the optic surface on the gimbal axes for pure rotational motion. The retaining clips provide compressive loading opposite the balls, so the optic is not distorted. The edge of the optic rests on two steel rods. A nylon-tipped screw provides a small amount of opposing pressure for stable optic orientation�all providing exceptionally stable mounting


该605-4万向节安装提供超稳定的定位光学高达4英寸(101.6毫米)直径。主轴旋转360°,六角头螺丝提供粗调为每个轴控制。标准能微调螺丝提供高分辨率的±5°微调和防篡改锁螺丝。枢轴采用无摆动、预加载径向滚珠轴承，并采用弹簧加载消除齿隙。适配器在万向节轴上提供光学配准。这些安装结合了一个特别方便的运动学安装设计，以适应各种厚度的光学。弹簧固定夹有手指握把。三个抛光钢球以运动的方式在框架轴上注册光学表面，实现纯旋转运动。固定夹提供了相对于球的压缩载荷，因此光学不失真。光学的边缘依靠两根钢条。nylon-tipped螺钉提供少量的反对压力稳定的光学定位�都提供非常稳定的安装